ENGGS29/03/2010
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED139710PU/002
Certificate date 3/29/10
Type Mezzi di salvataggio
Directive 2008/67/EC
Product Launching appliances using fall (davits)
Item Nº A.1/1.21
Model Life boat davit-Hinged gravity type,No.:YNHD 01
Identification YNBD 0803-01, intended for SLS shipbuilding Co.
 Hull No. S503
Manufacturer YOUNGNAM MACHINERY CO.,LTD
Tel. N.,Fax, Email +82 52 257 8171, ---, ---
Place of production 357 GOYUN-RI WOONGCHON-MYUN ULJU-KUN ULSAN  % KOREA, REPUBLIC OF
Tel. N.,Fax, Email +82 52 257 8171, ---, ---
Applicant YOUNGNAM MACHINERY CO.,LTD
Place of requester 357 GOYUN-RI WOONGCHON-MYUN ULJU-KUN ULSAN  % KOREA, REPUBLIC OF
Tel. N.,Fax, Email +82 52 257 8171, ---, ---
Standards IMO Res. MSC 81(70)
Head Office PUSAN



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED139710PU/002

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.21
Description Launching appliances using fall (davits)
Model Life boat davit-Hinged gravity type,No.:YNHD 01
Identification YNBD 0803-01, intended for SLS shipbuilding Co.
 Hull No. S503
Applicant YOUNGNAM MACHINERY CO.,LTD
357 GOYUN-RI WOONGCHON-MYUN ULJU-KUN ULSAN
KOREA, REPUBLIC OF
Testing standards IMO Res. MSC 81(70)
    
Issued at Busan 
on March 29, 2010

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /10
 

________________________________________
RINA - Giorgio Saletti
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED139710PU/002
Manufacturer:
YOUNGNAM MACHINERY CO.,LTD
Address
357 GOYUN-RI WOONGCHON-MYUN ULJU-KUN ULSAN
KOREA, REPUBLIC OF

Verified components of the equipment (with serial number)
YNBD 0803-01, intended for SLS shipbuilding Co.
 Hull No. S503
Technical documentation
Drawing approval No. PUST-4082 dated 4 September 2009
 RINA assesment report No. 10PU011397

Limitation on the acceptance or use of the product
Max. working(lowering) load : 5,550 kg Hoisting load : 3,450 kg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Giorgio Saletti
RINA
**** NOTICE: This is NOT an official certificate ****