APPROVAL CONDITIONS
Steel making process & deoxidation practice: basic oxygen process, fully killed, fine grained steel
Casting process: continuous casting
Condition of supply and thickness as per below table:
| Steel grades 1) | Fine Grain
Elements 2) | Delivery Conditions | Max Thickness
(mm) |
Normal Strength Steel |
| A,B | Al | AR | 50 (Gr.B) 100 (Gr.A) |
Al or Al+Nb | N | 100 |
| Al+Nb+V | N | 150 |
| D | Al or Al+Nb | N | 100 |
| Al+Nb+V | N | 150 |
| E | Al or Al+Nb | N | 60 |
| Al+Nb+V | N | 150 |
| A, B, D | Al | NR | 35 |
|
|
|
|
High Strength Steel |
| AH32 | Al+V+Ti | AR | 12.5 |
| Al+Nb | AR | 20 |
| AH32 - DH32 | Al+V | AR | 25 |
| Al+Nb | NR | 35 |
| AH32 - DH32 - EH32 | Al+Nb | N | 60 |
| Al+Nb | TM | 60 |
| Al+Nb+V+Ti | TM | 60 |
| Al+Nb+V | N | 150(3) |
| FH32 | Al+Nb+V+Ti | TM | 60 |
| AH36 | Al+V+Ti | AR | 12.5 |
| Al+Nb | AR | 60 |
| AH36 - DH36 | Al+V | AR | 25 |
| Al+Nb | NR | 55 |
| Al+Nb+V | NR | 55 |
| AH36 - DH36 - EH36 | Al+Nb | N | 60 |
| Al+Nb | TM | 60 |
| Al+Nb+V+Ti | TM | 60 |
| Al+Nb+V | N | 150(3) |
| AH36 - DH36 - EH36 | Al + Nb + Ti | TM + ACC | 80 |
| FH36 | Al+Nb+V+Ti | TM | 60 |
Page 2 of 2 |
| Steel grades 1) | Fine Grain
Elements 2) | Delivery Conditions | Max Thickness
(mm) |
High Strength Steel (continued) |
| AH40 | Al+V | AR | 12.5 |
| AH40 – DH40 | Al+Nb | NR | 55 |
| Al+Nb+V | NR | 55 |
| AH40 - DH40 - EH40 | Al+Nb | TM | 60 |
| Al+Nb+V+Ti | TM | 60 |
| FH40 | Al+Nb+V+Ti | TM | 35 |
|
|
|
|
High Strength Steel for Welded Structures |
| A420, D420, E420, F420 | Al+Nb+V | TM | 35 |
| A460, D460, E460, F460 | Al+Nb+V | TM | 35 |
| A500, D500, E500, F500 | Al+Nb+V | TM | 35 |
|
|
|
|
1) The approval is valid also for equivalent structural steel grades according to EN 10025-2 / EN 10025-4
and steel plates intended for boilers and pressure vessels according to EN 10028-2.
2) AR: As Rolled; N: Normalised; NR: Normalized Rolled; TM: Thermo-mechanical rolling.
3) Minimum plate thickness applicable 61 mm.
Survey conditions:
The plates are to be in compliance in all respects with the relevant RINA rules and are to be tested accordingly.
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.
|
|