DIP027118Y2BIL- -  -  N- TE 40 -N- S- S- -12/10/2018- Diporto- - NS- N- - N-  - 813,488BbisDiportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP027118Y2- N-813488
 
Form
  Diporto(TO)
Certification N. DIP027118Y2 - (BIL)
Certificate date 12/10/2018
Description
UNITA' DA DIPORTO
Product BATTELLI PNEUMATICI

Model or Denomin.
Items
TE 40
Applicant CANTIERI CAPELLI SRL
Place of requester VIA DELLE INDUSTRIE 19  %  26020 SPINADESCO (CR)  % ITALY
Tel. N.,Fax, Email 0372 491399, 0372 492115, ---
Directive 2013/53/EU
Standards Direttiva Europea 2013/53/UE - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione.
RCD II - D3 - (Modulo A1 - Rapporto di visita) BIL
Dettaglio
RAPPORTO DI VISITA
EXAMINATION REPORTN. DIP027118Y2
Il RINA, in qualità di organismo notificato (n° 0474), ha verificato l' esecuzione degli accertamenti tecnici in relazione ai requisiti essenziali di sicurezza 3.2 (stabilità e bordo libero) e 3.3 (galleggiabilità) stabiliti dalla Direttiva 2013/53/UE per il seguente modello di unità da diporto.
RINA as notified body (no. 0474), verified the technical ascertaiment relevant to the essential safety requirements 3.2 (stability and freebord) and 3.3 (buoyancy and flotation) of Directive 2013/53/EU for the following model of recreational craft.

Descrizione UNITA' DA DIPORTO
Description RECREATIONAL CRAFT
Tipo TE 40
Type
Norme di riferimento Direttiva Europea 2013/53/UE - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione.
Reference standards European Directive 2013/53/EU - Rules for EC certification of recreational craft and their components, personal watercraft, noise emissions from recreational craft and exhaust emissions from propulsion engines.
Questo documento è stato emesso su base volontaria ad integrazione del rapporto di visita ufficiale.
In esito ai risultati ottenuti ed indicati nel rapporto di visita ed in base agli Articoli 16, 17 e 18 della Direttiva 2013/53/UE il Fabbricante è autorizzato ad apporre sul prodotto sopradescritto la seguente marcatura.
This document has been issued on a volutary basis as an integration of the official examination report.
Following the results obtained and indicated in the examination report and on the basis of Articles 16, 17 and 18 of Directive 2013/53/EU, the Manufacturer is authorized to affix the following marking to the product described above.
_________________________________
RINA Services S.p.A.
  
Alberto Carmagnani
Rilasciato a  Genova   il  12  Ottobre  2018
   .   
Issued in Genoa on October 12, 2018
 



Questo documento e' composto di 1 pagina e di 1 allegato
This document consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
RAPPORTO DI VISITA
EXAMINATION REPORT
N. DIP027118Y2
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
TE 40


Lunghezza
(Lh) 11.92 (m)
Larghezza
(Bh) 3.50 (m)
Altezza di costruzione
(Ds) 1.26 (m)
Dislocamento
(mLDC) 7.13 (t)
Materiale dello scafo
TESSUTO GOMMATO
Propulsione
a motore
Comando timone
a distanza
Numero dei motori installati
-
Tipo di motori installati -
Potenza massima di esercizio - kW
Tipo combustibile -
Numero massimo persone trasportabili 18
Portata/carico massimo raccomandato dal costruttore (comprensiva delle persone), da riportare sulla "Targhetta del costruttore" 2540 kg (*)
Kg
Categoria di progettazione B

Note - Documentazione tecnica esaminata in forma completa il 12-10-2018
- L'examination report n° 2018/Y2/01/271  dettaglia le Norme/Standards di riferimento applicabili.
- Unità provvista di carena in PRFV.
- (*) Unità munita di motore F.B.;  la portata massima comprende anche la massa del motore.
- Il presente certificato annulla e sostituisce quello n.DIP007317MI rilasciato il 13-01-2017.
Notes - Examination of technical file completed on 12-10-2018.
- Examination report n. 2018/Y2/01/271  lists the relevant applicable Rules/Standards.
- Hull bottom in FRP.
- (*) Boat with outboard engine; maximum load includes also the engine's weight.
- This certificate annuls and replaces the one no.DIP007317MI issued on 13-01-2017.
Genova 12  Ottobre  2018 
Genoa October 12, 2018
**** NOTICE: This is NOT an official certificate ****