MED093724WS!001ENGD- -  -  N- HTBW-II -N- S- S- -16/04/2024- Marine Equipment- - SN- S- - N-  - 1,053,804B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED093724WS/001- N-Apr 15, 20291053804
 
Form
  Marine Equipment(TO)
MED186324WS/001
Certification N. MED093724WS/001 - (ENG)
Certificate date 16/04/2024
Type Mezzi di salvataggio
Product Immersion suits and anti-exposure suits designed to be worn WITHOUT a lifejacket: (b) immersion suit with inherent insulation
Item Nº MED/1.6b

Model or Denomin.
Items
HTBW-II
Applicant JIANGSU HAITUO TECHNOLOGY CO.,LTD
Place of requester MARINE EQUIPMENT INDUSTRIAL PARK, XINJIE TOWN, DONGTAI CITY % YANCHENG % JIANGSU, CHINA
Tel. N.,Fax, Email 13770096665, 0515 85759669, htxf118@126.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22, SOLAS 74 Reg.III/32, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC/Circ.1046, IMO MSC.1/Circ.1628.
Request 2024.02.21
Expire date 15/04/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Hai Wen Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED093724WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.6b
Description Immersion suits and anti-exposure suits designed to be worn WITHOUT a lifejacket: (b) immersion suit with inherent insulation
Type HTBW-II
Applicant JIANGSU HAITUO TECHNOLOGY CO.,LTD
MARINE EQUIPMENT INDUSTRIAL PARK, XINJIE TOWN, DONGTAI CITY,YANCHENG,JIANGSU, CHINA
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/22, SOLAS 74 Reg.III/32, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC/Circ.1046, IMO MSC.1/Circ.1628.
Issued in SHANGHAI on
This Certificate is valid until
April 16, 2024
April 15, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED093724WS/001
Page 1 of 3

Product Description

The HTBW-II insulated immersion suits is manufactured in four(4) sizes as following:
- M Size: Max. Height 1.70 meter, Max. Chest Girth 1.10 meter;
- L Size: Max. Height 1.90 meter, Max. Chest Girth 1.20 meter;
- XL Size: Max. Height 2.05 meter, Max. Chest Girth 1.30 meter;
- XXL Size: Max. Height 2.05 meter, Max. Chest Girth 1.40 meter.

The suit covers the whole body (feet and hands included) except the face, with the following main components :


Material and Components
Item
Model
Type
Manufacturer
Waterproof Material
Double Faced Foamed Rubber
-
Changzhou Chengjiali Polymer Material Company Limited
Buoyancy Material
Polyethylene Foam Slice and Double Faced Foamed Rubber
-
Zhangjiagang Hongxiang New Thermal Insulation Material Co., Ltd. Or,
Changzhou Chengjiali Polymer Material Company Limited
Watertight Zipper Closure
AD1023-L
Wuxi Hai Long Airtight Technology Co., Ltd
Sewing Thread
Dacron High
strength Line
-
Dongtai City Bosong Produce Suture Factory
Light
FZYD-II FZYD-III FZYD-V

Shanghai Fangzhan Fire Technology Co.,Ltd
Retro-reflective Tape
YSL-1101A / YSL-1101B
Yeshili New Materials (Xianju) Co., Ltd

Design Assessment

Insulated immersion suits designed to be worn without a lifejacket with additional lifting loop in compliance with IMO Res.MSC.323(89).

The design assessment is based on IMO Res. MSC.48(66) as amended by IMO Res. MSC.207(81) and IMO Res. MSC.218(82).

Production tests shall be conducted for each suit in accordance with IMO Res. MSC.81(70), part 2.






 





ATTACHMENT TO
CERTIFICATE No. MED093724WS/001
Page 2 of 3

Continued:

Reference Documents

- Technical drawing, approved by RINA with No.: SHFP-26631;
- Bill of Material, approved by RINA with No.: SHFP-8942;
- Technical Specification, approved by RINA with No.: SHFP-8992;
- Operation and Maintenance Manual, filed by RINA with No.: SHFP-8994.

Test Report

The product has been tested in accordance with the Revised Recommendation on Testing of Life-saving appliances, IMO Res. MSC.81(70) Part 1, as amended by IMO Res. MSC.200(80), IMO Res. MSC.226(82) and IMO Res. MSC.323(89).

- Evaluation and Test Report (HTBW-II) (Ref No.: 2015219), issued by Wuhan Testing Center of Marine Life-saving Appliances, filled by RINA with No.:SHFP-11177.


Remarks

The immersion suit shall be equipped with safety light EC Type Approved, releasable buoyant line and suitable means to lift the wearer from the water, in compliance with MSC.207(81).

The immersion suit can be equipped with different position indicating lights and Retro-reflective materials EC type Approved in compliance with Directive 2014/90/EU as amended.


Note

Renewal of Previous EC Type Examination (Module B) Certificate No.: MED035818WS/005. As declared, the initial conditions at the time of the approval are maintained, only change the suit sizes. And Retro-reflective materials certificated under IMO Res. MSC.481 (102) will be fitted on Immersion Suit.




ATTACHMENT TO
CERTIFICATE No. MED093724WS/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****