MED657626WSENGB- -  -  N- JYHG55 -N- S- S- -13/10/2026- Marine Equipment- - SN- S- - N-  - 238,749B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED657626WS- N-Oct 12, 2031238749
 
Form
  Marine Equipment(TO)
MED657626WS
Certification N. MED657626WS - (ENG)
Certificate date 13/10/2026
Type Mezzi di salvataggio
Product Launching appliances using falls (davits)
Item Nº MED/1.21

Model or Denomin.
Items
JYHG55
Applicant JIANGSU JIAOYAN MARINE EQUIPMENT CO.,LTD
Place of requester NO.22 SHUIYUN ROAD, YUECHENG TOWN, JIANGYIN CITY, JIANGSU P.R.CHINA
Tel. N.,Fax, Email 051086596231, 051086581013, zhanghairong@jyboat.com
Directive (EU) 2026/1434
Standards IMO Res. MSC.81(70), as amended.
Reference Documents SOLAS 74 Reg. III/4, SOLAS 74 Reg. X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8.
Expire date 12/10/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED657626WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2026/1434.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type JYHG55
Applicant JIANGSU JIAOYAN MARINE EQUIPMENT CO.,LTD
NO.22 SHUIYUN ROAD, YUECHENG TOWN, JIANGYIN CITY, JIANGSU P.R.CHINA
Testing standards IMO Res. MSC.81(70), as amended.
Reference standards SOLAS 74 Reg. III/4, SOLAS 74 Reg. X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8.
Issued in SHANGHAI on
This Certificate is valid until
October 13, 2026
October 12, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED657626WS
Page 1 of 2

TECHNICAL DATA


Product Description:
- Maximum Working Load: 55 kN
- Maximum Hoisting Load: 40 kN
- Minimum Launching Load: 15 kN
- Arrangement/positioning of launching appliance on board of the ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- The launching appliance is considering MSC.385(94) (polar code) as amended with Polar Service Temperature (PST) -15˚C.

REFERENCE DOCUMENTS

Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-66027 JYGH55 Hydraulic Gravity Davit (SHST/2026/1548/LEIGU).

TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, the launching appliance was tested under witnessing


of RINA as per Prototype Test Report dated on 13/10/2026.
The launching appliance was also tested under low temperature of -15˚C under witnessing of RINA as per Test Report dated on 20/10/2026.

NOTE

- Installation, on board testing, support to the deck structure shall be accepted by attending surveyor.

- Materials as stated on the approved drawing are to be delivered with maker's product certificates..





ATTACHMENT TO
CERTIFICATE No. MED657626WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****