Fire-fighters outfit — lifeline (Type: RSS-1), is designed as below:
- Lifeline consists of steel wire (6 x 19, core 4 ~ 4.2 mm), of minimum 30 meters in length, with a strength of 3.5 KN for 5 min without failure;
- It is equipped with a snap-hook at each side.
Material Specification:
- Wire: 304 Stainless Steel; - Lantern Ring & Snap-hook: 304 Stainless Steel
Technical Documentation
- Technical Drawing, approved by RINA with No.: SHFP-37590;
- User Manual, filed by RINA with No.: SHFP-39031;
- Technical Specification, filed by RINA with No.: SHFP-39032;
- Lifeline Lable, filed by RINA with No.: SHFP-39033;
- Qualified Supplier, filed by RINA with No.: SHFP-39034.
Tests Carried Out
- The required static load test of 3.5 KN for 5 min as per IMO Resolution MSC.98(73) Chapter 3.2.1.3 (FSS Code) and Test as per ISO 23269-2:2011, was carried out under the supervision of RINA, the Test Report was filed by RINA with No.: SHFP-39030.
Note: Material of fireman safety line (304 stainless steel) is considered as non-combustible as specified in IMO Res. MSC.61(67)-FTP Code, Annex 2, Part 1.
Application / Limitation
Approved for use as fireproof lifelines for fire-fighter´s outfit used in connection with a self-contained breathing apparatus approved under item MED/3.7 and item MED/7.1.
Each lifeline is to be supplied with its instructions for use, inspection and on-board maintenance complying with Regulations stated on the front page of this certificate. These instructions are to be kept on board.