ENGGS20/10/2014
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED184014WS/002
Certificate date 10/20/14
Type Mezzi di salvataggio
Directive 2012/32/EU
Product Winches for survival craft and rescue boats: (d) rescue boats & (c) liferaft
Item Nº A.1/1.41d; A.1/1.41c
Model KR-4W
Identification S/N.: 1404035
Intend for: Hudong Zhonghua Shipbuilding Group;  
H/N: H1696A (RI91214)
Manufacturer NINGBO KAIRONG SHIP MACHINERY CO., LTD.
Tel. N.,Fax, Email +86 574 86111777, +86 574 86111788, ---
Place of production 86 MOULD ROAD, DAQI INDUSTRIAL PARK,BEILUN NEW DSTRCT,NINGBO  %  315806 ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 574 86111777, +86 574 86111788, ---
Applicant NINGBO KAIRONG SHIP MACHINERY CO., LTD.
Place of requester 86 MOULD ROAD, DAQI INDUSTRIAL PARK,BEILUN NEW DSTRCT,NINGBO  %  315806 ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 574 86111777, +86 574 86111788, ---
Standards IMO Res. MSC 81(70) as amended
Surveyor HU Zeen
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED184014WS/002

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.41d & & 1.41c
Description Winches for survival craft and rescue boats: (d) rescue boats & (c) liferaft
Model KR-4W
Identification S/N.: 1404035
Intend for: Hudong Zhonghua Shipbuilding Group;  
H/N: H1696A (RI91214)
Applicant NINGBO KAIRONG SHIP MACHINERY CO., LTD.
86 MOULD ROAD, DAQI INDUSTRIAL PARK,BEILUN NEW DSTRCT,NINGBO
315806 ZHEJIANG
CHINA
Testing standards IMO Res. MSC 81(70) as amended
    
Issued at Shanghai 
on October 20, 2014

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /14
 

________________________________________
RINA Services S.p.A. - Hong Gu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED184014WS/002
Manufacturer:
NINGBO KAIRONG SHIP MACHINERY CO., LTD.
Address
86 MOULD ROAD, DAQI INDUSTRIAL PARK,BEILUN NEW DSTRCT,NINGBO
315806 ZHEJIANG
CHINA

Verified components of the equipment (with serial number)
S/N.: 1404035
Intend for: Hudong Zhonghua Shipbuilding Group;  
H/N: H1696A (RI91214)
Technical documentation
Drawing No.SHST-17772 approved by RINA dated on 01/08/2014 in compliance with SOLAS 74/96 as amended Reg. III/16,III/17,III/23,III/24 and III/34; IMO Res.MSC.36(63), IMO Res.MSC.48(66), IMO Res.MSC.97(73).

Test report issued by RINA on 11/09/2014 (S/N.:1404035) in accordance with resolution MSC.81(70) and amended.

Main characteristic:
- Safe working load: 25 kn;
- Max. hoisting load: 14kn;
- Min. lowering load: 6.8kn;
- Hoisting speed: >=18m/min;
- Lowering speed:  >=48m/min;
- Steel wire: 18 x 19 + IWS-16mm -120kn;
- Braking load of wire rope:>=157kn;

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Hong Gu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****