DIP100922CSENGD- -  -  N- Windlass ARADO/NV with chainstopper CHST -N- S- S- -08/07/2022- Prodotti per nautica diporto- - SN- N- Giovanni Carratino- N-  - 426,420Giovanni CarratinoBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP100922CS- N-Jul 7, 2027426420
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP100922CS - (ENG)
Certificate date 08/07/2022
Product Salpa ancore

Model or Denomin.
Items
Windlass ARADO/NV with chainstopper CHST
Applicant MZ ELECTRONIC S.R.L.
Place of requester VIA BAINSIZZA, 2  %  20900 Monza (MB)  % ITALY
Tel. N.,Fax, Email 0392148126, 0392146244,
Directive NONE
Standards RINA Rules
Expire date 07/07/2027
Responsible Office Trieste
CERTIFICATO DI OMOLOGAZIONE ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. DIP100922CS
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Description Windlass
Type Windlass ARADO/NV with chainstopper CHST
Applicant MZ ELECTRONIC S.R.L.
VIA BAINSIZZA, 2
20900 Monza (MB)
ITALY
Reference standards RINA Rules
  

 
 




   .   This Certificate is valid until July 7, 2027
_________________________________
RINA Services S.p.A.
Giovanni Carratino
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. DIP100922CS
Enclosure - Page 1 of 1
Windlass ARADO/NV with chainstopper CHST
Reference documents


- Technical Documentation approved with Drawing no. PRMT-18084 and PRMT-18085, dispatched with letter : PRMT/2022/62/CRLVA

- Type Approval Test Report approved with Drawing no. PRMT-18310 , dispatched with letter PRMT/2022/85/CRLVA

Technical characteristics


Maximum chain Diameter [mm]
16
17.5
19
20.5
22
Design Continuous Duty Pull [KN]
( very high tensile strength steel chain )
12.16
15.55
17.15
19.97
23
Output Speed of rotation: [rpm ]
12.2
12.2
13.2
13.2
11.4

Maximum anchorage depth : 82,5 m

Arado/NV Windlass can be provided with Chainstoppers CHST

Fields of applications

Yachts with following notations :

Y, ● MACH < 500 GT

YCH, ● MACH < 500 GT

Y, ● MACH > 500 GT

YCH, ● MACH > 500 GT

Materials/Components

As per above mentioned approved drawings.

Acceptance Conditions


See also approval letters above mentioned .
The installation on board is to be made in accordance with the Manufacturer’s instructions.
· The validity of the present certificate is based on the assumption of the constant conformity of the single product manufactured to the prototype that has been tested with positive results to the type approval tests. The firm is responsible in the whole of the above mentioned conformity.
· The holder of the type approval certificate has to inform RINA of any intended modifications to the product and/or manufacturing process which are liable to effect the required conformity of the product.
· The certificate becomes automatically invalid in the following case:
1. the holder of the certificate does not respect the above mentioned obligations.
2. changes have been made to the reference document on which the type approval is based.
· The type approval certificate may be declared suspended or cancelled by RINA when the conditions on which the type approval was based are not fulfilled.

Trieste July 8, 2022
**** NOTICE: This is NOT an official certificate ****