DIP361125CS!001BIL- -  -  N- ATLAC 580 series,ATLAC E-NOVA series  -N- S- S- -07/07/2026- Prodotti per nautica diporto- - SN- N- Stefano Moscatelli- N-  - 948,464Stefano MoscatelliBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP361125CS/001- N-Jul 7, 2029948464
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP361125CS/001 - (BIL)
Certificate date 07/07/2026
Product Resine

Model or Denomin.
Items
ATLAC 580 series,ATLAC E-NOVA series
Applicant AOC AG
Place of requester Bleicheplatz 2  %  8200 Schaffhausen  % SWITZERLAND
Tel. N.,Fax, Email +31 (0)38 303 3105, ---, benny.luijsterburg@aocresins.com
Directive NONE
Standards Norme per l' omologazione di componenti di materiali compositi destinati alla costruzione di scafi (NC/C.24 - ed. 01/01/1997)
Expire date 07/07/2029
Head Office VIAREGGIO
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP361125CS/001
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Resine
Description Resins
Tipo ATLAC 580 series
ATLAC E-NOVA series
Type
Richiedente
Applicant
AOC AG,Bleicheplatz 2,8200 Schaffhausen,SWITZERLAND
Norme di riferimento Norme per l' omologazione di componenti di materiali compositi destinati alla costruzione di scafi (NC/C.24 - ed. 01/01/1997)
Reference standards Rules for the type approval of components of composite materials intended for hull constructions (NC/C.24 - ed. 01/01/1997)








_________________________________
RINA Services S.p.A.
  
Giuseppe TianoStefano Moscatelli
       
Rilasciato a VIAREGGIO il 7  Luglio  2026.  Questo Certificato è valido fino al 7 Luglio 2029
   
Issued in VIAREGGIO  on July 7, 2026. This Certificate is valid until July 7, 2029
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
DIP361125CS/001
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
ATLAC 580 series,ATLAC E-NOVA series

Documenti di riferimento



Reference documents



Campo di applicazione




Field of application



Condizioni di accettazione





Acceptance conditions



Note:
Varianti alle resine omologate

Remarks:
Variants to type - approved resins
Specifiche tecniche depositate presso la Direzione Generale del RINA. Test report archiviato.

Technical specification deposited at RINA Head Office. Test report filed.

Realizzazione di stratificati e parti strutturali di scafi in plastica rinforzata con fibra di vetro, nei limiti previsti dai pertinenti Regolamenti del RINA.

Construction of laminates and structural parts of vessels in G.R.P. at conditions of the relevant RINA Rules.

Le resine devono essere conservate ed impiegate secondo le indicazioni del fabbricante. Gli estremi del presente certificato dovranno essere riportati sui contenitori di resine prodotte.

The resins have to be stocked and used following the instructions of the manufacturer. The number and the date of this certificate shall have to be marked on the drums of the resins.
ATLAC 580 ACT
ATLAC 580 ACT 10
ATLAC 580 AC 300

ATLAC E-NOVA MA 6215
ATLAC E-NOVA MA 6216
ATLAC E-NOVA MA 6217
ATLAC E-NOVA MA 6325


 Viareggio  07 Luglio 2026 
 Viareggio   July 07, 2026
**** NOTICE: This is NOT an official certificate ****