The DARDANOS I System is an Engine Speed Control System for marine Diesel Engine in multiple Engine Installation:
Hardware Description:
Module / Unit | | Type designation |
|
|
|
Control Unit | : | Valve Control MVC01 |
Sensor | : | HIA 3X-..; Temperature Sensor TS 01-28-PT1000 |
Valves
Rated Power supply
Output Voltage for solenoid
Degree Protection
4 Analogue inputs
11 Digital Inputs
2 Analogue Output
2 CAN Communication Line
1 Serial Interface | :
:
:
:
:
:
:
:
: | Solenoid Valves SM 01/02
24 DC
24Vdc - 48Vdc - 90Vdc
IP65
0...5V - 0...25mA
Pull down U0 > 4,3 V U1< 4,3 V
0...5V - 0...25mA
System Communication
Dialogue / Diagnostic |
Reference documentation:
- MVC System - DARDANOS I - MVC 01-20 - Hardware Specification dated 12-2007
- Control System for Electronically Controlled Injection Systems PPN – PNU – CR DARDANOS System Specification - Dated 18-02-09
- Control System Solenoid Valve Technic DARDANOS I MVC 01-10/20
- Electronically Controlled Injection Systems Walkthrough Summary dated 8-6-2009
- Magnetic Valve Control DARDANOS Basic Information PPN - PNU - CR Level 6
- DARDANOS I - System FMEA - dated 29-05-09
- Governor Connection Diagram MVC 01-20/24 dated 19-10-2009
Test report:
Environmental Test report ECL-EMC n° 08-059 dated 31-3-2008 - DAR Deutsher Akkreditierung Rat
Environmental Test report n° 008146_01_G - Magnetic Valve Controll - MVC 01-20, 90V - dated 15-5-2008 - DAR Deutsher Akkreditierung Rat
Environmental Test report n° 008146_01_H - Magnetic Valve Controll - MVC 01-20 - dated 18-4-2008 - DAR Deutsher Akkreditierung Rat
List of monitoring MVC01-20
TYPE APPROVAL CERTIFICATE
N° ELE421509CSEnclosure - Page 2 of 2
DARADANOS I - MVC01
Remark:
According to SOLAS Requirements, the DARDANOS I is not suitable for the following applications:
- On Emergency Generators Engines.
For each specific installation detailed istallation drawing are to sent for approval.
Retentions:
The validity ot the Type Approval is maintained if any implementations / modifications are reported, including changing in Hardware and Software; moreover tests are to be provided in order to:
- Make sure that such modifications do not affect the functionality of the system,
- Verify that no major modifications are introduced in the system structure (HW/SW)
Traceability of Hardware and Software version/release is to be ensured for each installation/application