| Window, with one or more central mullions, having, each glass, maximum overall clear size of 520x1666 mm (WxH). The glass compound is composed of pane type CONTRAFLAM MARINE (manufacturer Vetrotech) having total thickness of 22 mm and composed of 3 glasses and 2 layers of intumescing gel, a void space 9 mm deep, a toughened pane having thickness of 6 mm (manufacturer Somec), a PVB layer having thickness of 1.52 mm and a toughened pane having thickness of 6 mm (manufacturer Somec). The frame is composed of a stainless steel profile having depth of 152 mm and thickness of 14.5 mm, fillet welded on both sides to the bulkhead, to which is fixed a glass retaining stainless steel flat, 8 mm thick and having width of 40 mm. The central mullions are composed of a stainless steel flat, 15 mm thick, welded to a square stainless steel pipe having thickness of 6 mm and dimensions of 100x80 mm and a glass retaining frame composed of a stainless steel flat having width of 80 mm and thickness of 8 mm. The glass retaining frames, fitted on the side exposed to the fire, are fixed to the frame and to the mullions by means of M6 screws fitted with pitch of 75 mm. Between the glass faces, the frame, the mullions and the glass retaining flats, gaskets of PAPERSEAL ECO, 5 mm thick, are fitted. Between the glass edges and the frame, on the lower side, spacers of calcium silicate type FIRESIL, are fitted. The glass panes are sealed by means of silicone type SIKASIL WS-605 S. The frame is insulated by means of a layer of mineral wool with glass cloth, having density of 36 kg/m3 and thickness of 60 mm named U SeaProtect Roll 36 G220. Field of application Fire resistant A-30 Class window with fire hazard on the inner side of the application and on the side fitted with the CONTRAFLAM MARINE pane.Reference documents SOMEC drawing No. CM0108-M01-SD001 dated 1 August 2017 approved on 2 August 2017 with endorsement No. LABS-1515.Tests carried out Tests as per RINA Test Laboratory report No. 2017CS012477/1 issued on 2 August 2017 according to IMO 2010 FTP Code Part. 3 - Appendix 2 - A.I. |