Double leaf hinged door whose maximum clear opening dimensions are 2350 mm (W) and 2260 mm (H). The two leaves have maximum dimensions of 1158x2267 mm and 1214x2267 mm. Each door leaf is made of a sandwich panel named NEPTUNE BOARD composed of two outer moulded surfaces made of magnesia, magnesium chloride and water glass and an internal panel of mineral wool. The outer skins have thickness of 2 mm each and density of 1250 kg/m3; the mineral wool (certified non combustible in conformity to the requirements of the IMO FTP Code) has thickness of 46 mm and density of 160 kg/m3. Between the two skins, every 100 mm, vertical stiffeners made of the same material as the two skins are fitted. The composite panel is contained within two steel sheets having thickness of 1.25 mm. Each leaf may be fitted with a window having maximum clear light of 400 mm in width and 400 mm in height. The glass, type PYROBEL 25, has nominal thickness of 26.6 mm. The glass retaining frame, made of steel profiles having thickness of 3 mm and 1.25 mm, is fixed to the leaf by means of screws type M5x20 every 108 mm. Between the frame and the glass retaining frame ceramic tapes type KERAFIX FLEXLIT 25x5 mm are fitted, whereas between the glass and the leaf intumescent strips type PALUSOL KERAFIX 30x3.8 are fitted. The glass retaining frame is also provided with a layer of Neptune Board having thickness of 14 mm.
The door frame, composed of steel profiles having thickness of 4 mm, is fixed to the bulkhead by means of bolts type M8x25 every 150 mm. The door frame is fitted with a silicon rubber seal type 7001 60 rossa produced by Tuvu gomma having dimensions of 13x13 mm. The door may be equipped with a self-closing hose port.
Field of application Fire resistant A-60 Class double leaf hinged door with the fire hazard on both sides in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf;
- maximum door size tested;
- door used with a fire tested frame design.
The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents PANMERC ENTERPRISES LTD drawing No. HDR-A60-120 Rev. A dated 27 October 2015 approved on 16 February 2016 with endorsement No. LABS-1212.
Tests carried out Test as per RINA Test Laboratory report No. 2015CS013569/2 issued on 23 March 2016 according to IMO 2010 FTP Code Part 3. |