Product description:
The MCM-11 module (46WMCM03, 46WMCM03_I and 46WMCM03_I_SP) is a microprocessor based control unit. It will serve as the core of the engine control system and be capable of handling speed governing, safety functions and overall control for a variety of engine applications. Mechanical design admits mounting either in cabinet environment or directly on the engines.
Main features:
Power supply: two redundant 24V DC (monitored)
Digital output: - 3 ch. (24V DC; 3A) or PWM 50 –500 Hz (wire break and short circuit detection)
- 16 ch. (24V DC; 150mA) individual insulation (short circuit and overvoltage protection)
- 2 ch. (24V DC; 200mA) Safety Wire Loop Input / Output
Digital input: - 26 ch. individually configurable N.O. or N.C. switches
- 2 ch. and 1 reference (ID), binary
- 1 ch. Frequency input , 2 Vpp (50Hz);
- 2 ch. 0-15 kHz, magnetic sensor, max diff. Volt. 40V
Analogue input: - 8 ch. 4-20 mA (6 ch. isol., 2 ch. not isol.); 1 ch. config. for input –5V to + 5V
Analogue output: - 6 ch. 4-20 mA; 1 ch. 0-20mA / 0-200mA (750/80 ohm) (wire break detection)
Communications: - 4 ch. CAN-bus 500 kbit/s; 2 ch. isol. ; WE-CAN+, CANopen
- 1 ch. RS 485 Serial bus isolated, minimum 187,5 kbit/s (Modbus or Profibus protocols)
Documentation:
- MCM-11 Hardware Specification 1.6.pdf (based on the Wartsila's: V53L1684_000_c.pdf);
- 46WMCMPRO03_0300_Component_assembly.pdf; 46WMCMPRO03_0300_Schematic.pdf;
- 2215AZ_Main_assembly_06.pdf; 2250PZ_Enclosure_06.pdf;
- 46WMCM03 ver 5.0 Partslist.pdf; 46WMCM03_I ver 5.0 Partslist.pdf.
Test Reports:
Nemko: 88349 dated 21/08/2007; 232274 dated 27.02.2013
VTT: VTT-S-07336-07 dated 29/08/2007
SGS: - 247972-1 dated 27/07/2007; HELEM2103000076-1 dated 31/03/2021;
HELEM2104000110 dated 06/04/2021
Vansco/Parker: MCM-11 Type Approval Test Plan and MCM-11 additional EMC test plan 7
The MCM-11 modules have been tested and fulfils the conditions mentioned in IACS UR E10, rev. 7.
Remark:
This type approval certificate is not covering specific operation of MCM-11 module. Complete system schematics, description of functionality and F.M.E.A will be evaluated before of each installation on board; software release is to be communicated.
This certificate replaces the previous certificate No. ELE220716XG/001.