FAB069626PUENG- -  -  N- Austenitic stainless steel RINA grade 304(L),316(L) or equivalent steel according to recognized standards -N- S- S- -25/03/2026- Fabbricanti Approvati- - NN- N- - S-  - 1,129,051BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB069626PU- N-May 2, 20311129051
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB069626PU - (ENG)
Certificate date 25/03/2026
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio saldati

Model or Denomin.
Items
Austenitic stainless steel RINA grade 304(L),316(L) or equivalent steel according to recognized standards
Applicant SEAH STEEL CORPORATION - CHANGWON PLANT
Place of requester 280, Gongdan-ro, Seongsan-gu  %  51569 Changwon-si (Gyeongsangnam-do)  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 55 278 2265, ---, ---
Standards RINA Rules for the approval of manufacturers of materials
Expire date 02/05/2031
Head Office Busan
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB069626PU
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Welded steel pipes
Type Austenitic stainless steel RINA grade 304(L) 316(L) or equivalent steel
according to recognized standards

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until May 2, 2031
_________________________________
RINA Services S.p.A.
Sangho Lee
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB069626PU
Enclosure - Page 1 of 1
Austenitic stainless steel RINA grade 304(L) 316(L) or equivalent steel according to recognized standards

APPROVAL CONDITIONS



Size range: - Outside diameter : max. 406.4 mm
- Wall Thickness : 8.2 mm

Manufacturing Process: PAW + GTAW welded.

Heat treatment: Solution annealing.

Non destructive examination of welded seam: eddy current test.

Remarks: including low temperature service.

Survey conditions: the pipes are to be in compliance in all respects with the requirements specified in
Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.







General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

Busan  March 25, 2026
**** NOTICE: This is NOT an official certificate ****