MED063926CS!001ENG- -  -  N- C5A-rib -N- S- S- -23/03/2026- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED063926CS/001- N-Mar 22, 2031254401
 
Form
  Marine Equipment(TO)
Certification N. MED063926CS/001 - (ENG)
Certificate date 23/03/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.110

Model
Items/Sizes
C5A-rib
Applicant DE WAVE S.R.L.
Place of requester Via De Marini 60  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO MSC/Circ. 1120,IMO MSC.1/Circ. 1581
Request 27/01/2026
Validity 22/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED063926CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.110
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type C5A-rib
Applicant DE WAVE S.R.L.
Via De Marini 60,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9; IMO MSC/Circ. 1120; IMO MSC.1/Circ. 1581
Issued in Genoa on
This Certificate is valid until
March 23, 2026
March 22, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED063926CS/001
Page 1 of 2

Product description

Ceiling designated DEM C5 certified by RINA, class B-15, with certificate no. MED188923CS/001 dated 11/09/2023, installed at minimum 400 mm from the deck. The ceiling is equipped with the following accessories:

· Detail C: 0.6 mm thick carbon steel box, measuring 250x250 mm and 25 mm high, which has a coupling flange on all four sides with a width of 20 mm, the flange is screwed to the plank using carbon steel screws with a diameter of 4.2 mm.
The box is insulated on the sides to a height of 15 mm with Rockwool Searox SL488 wool with a thickness of 24 mm and a density of 220 kg/m3 and on top with a layer of Promat Promaguard ceramic material with a thickness of 10 mm and a density of 240 kg/m3 ;

· Detail D: 0.6 mm thick carbon steel box, measuring 250x250 mm and 41 mm high. The box is inserted into the wool of the slat, fitting flush with the side insulation of the box.
The box is insulated on the sides to a height of 15 mm with Rockwool Searox SL488 wool with a thickness of 24 mm and a density of 220 kg/m3 and on top with a layer of Promat Promaguard ceramic material with a thickness of 10 mm and a density of 240 kg/m3.

The ceiling may also be produced by:
- De Wave Polska, ul. Spoldzielcza 4, 87-600 Lipno, Poland;

Fields of application
Fire resistant B-15 Class ceiling with accessories.

Reference documents
DE WAVE drawing No. C-01-S1-11 Rev.2 dated 22/01/2026 enclosed on Test Report No.2026CS01639/2 dated 23/03/2026.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2026CS01639/2 issued on 23/03/2026 according to IMO 2010 FTP CODE Part 3 Annex 1.




ATTACHMENT TO
CERTIFICATE No. MED063926CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****