The Inflatable lifejackets (Type: CQYBII-150N & CQYBII-275N) are designed for adult with the following characteristics:
- 150N (CQYBII-150N),
- 275N (CQYBII-275N).
- Buoyance lost after 24 hours : ≤5%;
- Number of Inflatable Chambers: 2;
- Time of inflation inshape: ≤5s;
- With the following main components:
Components | Type | Manufacturer |
Lifejacket
Cover Fabric | 300D*300D DTY | Suzhou Mingwei Water Life Saving Equipment Co., Ltd. |
Inflatable Chamber Material | 210D Single-side 134T | Zhejiang Kangjia Plastic Products Co., Ltd. |
Trigger Device
(Inflation system) | Automatic / Manual Inflation: MK5 (UML-5) | Ocean Signal Ltd. |
Plastic Air Nozzle | BZTUBE-1 | Jiangyin Henghu New Material Co.,Ltd. |
Copper Alloy Nozzle | - |
CO2 Gas Cylinder | 33 g (CQYBII-150N)
60 g (CQYBII-275N) | Nantong Shangcheng Metal Technology Co., Ltd. |
Lifejacket Light | YYYD | Jiangsu Dingxiang Marine Equipment Co., Ltd. |
Whistle | RH/O | Yuyao City Ditang Village Ronghua Plastic Factory |
Retro-reflective Tape Material | II Type | Zhejiang Longyou Daoming Optics & Chemical Co., Ltd. |
Application/Limitation of Use
The lifejackets is approved for use only by adult of weight more than 43 Kg and height more than 155 cm.
The lifejackets is designed to fit person weighing up to 140 Kg and with a chest girth of up to 1750 mm.
The lifejackets can be equipped with different position indicating lights and Retro-Reflective materials EC Type Approved in compliance with Directive 2014/90/EU as amended.
 | ATTACHMENT TO
CERTIFICATE No. MED722126WS/017
Page 2 of 3 |
Continued:Design Assessment
The design assessment is based on IMO Res.MSC.48(66)-(LSA Code) as amended by IMO Res.MSC.207(81), IMO Res.MSC.218(82) and IMO Res. MSC.368(93), IMO Res. MSC.481(102) and IMO Res. MSC.554(108) etc..
Tests carried out in accordance with revised recommendation on testing of lifesaving appliance, IMO Res.MSC.81(70), Part 1, including IMO Res.MSC.200(80), IMO Res.MSC.226(82), IMO Res.MSC.323(89), IMO Res. MSC.378(93), IMO Res.MSC.544(107) and IMO Res. MSC.563(108) etc.
Production tests shall be carried out in accordance with IMO Res. MSC.81(70), Part 2 as amended.
Reference Documents
Technical drawings and manuals, approved and filed by RINA as following:
- Technical Drawing of Inflatable Lifejacket, approved with RINA No.: SHFP-24162 (CQYBII-150N) & SHFP-27204 (CQYBII-275N);
- Operation and Maintenance Manual, filled with RINA No.: SHFP-22849 (CQYBII-150N) & SHFP-27202 (CQYBII-275N);
- Component List, approved with RINA No.: SHFP-24306 (CQYBII-150N) & SHFP-27211 (CQYBII-275N);
- Main Technical Parameters, approved with RINA No.: SHFP-23263 (CQYBII-150N) & SHFP-27203 (CQYBII-275N);
- Marking, filed with RINA No.: SHFP-28309.
Tests Carried Out
Tests carried out in accordance with Revised Recommendation on Testing of Life-Saving Appliances, IMO Res. MSC.81(70), Part 1, including IMO Res. MSC.200(80), IMO Res. MSC.226(82), IMO Res. MSC.323(89) and IMO Res. MSC.378(93) as below:
- Evaluation and Test Report (Ref No.: 2022073) for Inflatable Lifejacket carried out by Wuhan Testing Center of Marine Life-saving Appliances dated on Mar.04.2022~Jun.15.2023, and filled with RINA No.: SHFP-24033 (CQYBII-150N);
- Evaluation and Test Report (Ref No.: 2023141) for Inflatable Lifejacket carried out by Wuhan Testing Center of Marine Life-saving Appliances dated on Aug.15.2023~Nov.03.2023, and filled with RINA No.: SHFP-27209 (CQYBII-275N);
- RTD Test Report on Serial Number SN37 for Inflatable Lifejackets carried out by Wuhan Testing Center of Marine Life-saving Appliances dated on Jun.01.2023, and filled with RINA No.: SHFP-22853 (CQYBII-150N);
- RTD Test Report on Serial Number SN37 for Inflatable Lifejackets carried out by Wuhan Testing Center of Marine Life-saving Appliances dated on 26/09/2023, and filled with RINA No.: SHFP-27205 (CQYBII-275N).
Test Reports for Inflatable Lifejackets materials and components:
- Test report (Ref. No.: 2010060) for Buckle, filled with RINA No. SHFP-22855;
- Test report (Ref. No.: 2012163) for Wistles, filled with RINA No. SHFP-22856;
- Test report (Ref. No.: 2019114) for Fabric, filled with RINA No. SHFP-22857;
- Test report (Ref. No.: 2022252) for Structural Webbing, filled with RINA No. SHFP-22858.
- Test report (Ref. No.: 2022253) for Sewing Thread, filled with RINA No. SHFP-22859.
Certificate of Conformity for CO2 Gas Cylinders:
- Certificate of Conformity for CO2 Gas Cylinders (33g, 60g) (Ref No.: SCC(18)-5093A), filled with RINA No.: SHFP-22846.
Marking of Product
The product is to be indelibly marked with name of manufacturer, type designation and date of manufacture. The marking shall comply with the LSA Code (IMO Res. MSC.48(66)), item 1.2.2.9.Note
This certificate annuls and replaces the certificate No. MED441723WS due to Change EU Authorised Representative.