MED066725CSENGD- -  -  N- FORC 25-50-100 P -N- S- S- -13/02/2025- Marine Equipment- - SN- S- - N-  - 0B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED066725CS- N-Feb 12, 20300
 
Form
  Marine Equipment(TO)
Certification N. MED066725CS - (ENG)
Certificate date 13/02/2025
Type Mezzi di salvataggio
Product Open reversible liferafts
Item Nº MED/1.39

Model or Denomin.
Items
FORC 25-50-100 P
Applicant LALIZAS ITALIA S.R.L.
Place of requester VIA FONTANELLE 22  %  16012 Busalla (GE)  % ITALY
Tel. N.,Fax, Email 010968011, 0109670577, rd.3@lalizas.com
Directive (EU) 2024/1975
Standards IMO Res.MSC. 36(63)-(1994 HSC Code), Annex 10 , IMO Res.MSC. 97(73)- (2000 HSC Code), Annex 11, IMO Res.MSC.481(102).
Reference Documents SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.36(63)-(1994 HSC Code) Annex 10, IMO Res.MSC.48(66)-(LSACode) I, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res.MSC.97(73)-(2000 HSC Code) Annex 11, IMO Res.MSC.481(102)
Request 5/02/2025
Expire date 12/02/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Fabio Morbioni S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED066725CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.39
Description Open reversible liferafts
Type FORC 25-50-100 P
Applicant LALIZAS ITALIA S.R.L.
VIA FONTANELLE 22,16012 Busalla (GE),ITALY
Testing standards IMO Res.MSC. 36(63)-(1994 HSC Code), Annex 10 , IMO Res.MSC. 97(73)- (2000 HSC Code), Annex 11, IMO Res.MSC.481(102).
Reference standards SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.36(63)-(1994 HSC Code) Annex 10, IMO Res.MSC.48(66)-(LSACode) I, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res.MSC.97(73)-(2000 HSC Code) Annex 11, IMO Res.MSC.481(102)
Issued in Genoa on
This Certificate is valid until
February 13, 2025
February 12, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED066725CS
Page 1 of 3


Product description


Model: Open reversible liferaft 25 persons
Main dimension Octagonal shape - (4350 x 4350) mm , height 680 mm
Buoyancy tubes Diamter: 340mm - Volume: 2.40 m³
Color of tubes 4 sides black colour - 4 sides vivid reddish orange colour
Floor area 11.13 m²
Working pressure 0.017 MPa
Nominal weight 96 Kg
Roll container Length = 1182mm; Ø max.= 562mm; weight = 13 kg (tolerance 3%)
Inflation system 1 bottle 18.75 litres capacity; mass CO2 = 10740 g; mass of Nytrogen = 506 g

Model: Open reversible liferaft 50 persons
Main dimension Hexadecagon shape - (5920 x 5920) mm , height 840 mm
Buoyancy tubes Diameter: 420 mm - Volume: 4.83 m³
Color of tubes 12 sides black colour - 4 sides vivid reddish orange colour
Floor area 41.05 m²
Working pressure 0.017 MPa
Nominal weight 164 Kg
Roll container Length = 1590mm; Ø max.= 640mm; weight = 23 kg (tolerance 3%)
Inflation system 2 bottle 14,0 litres capacity; mass CO2 = 8512 g; mass of Nytrogen = 448 g

Model: Open reversible liferaft 100 persons

Main dimension n° 2 liferafts 50p, each with hexadecagon shape - (5920 x 5920) mm, height
840mm
Buoyancy tubes Diameter: 420 mm - Volume: 4.83 m³ 8 (each liferafts)
Colour of tubes 12 sides black colour - 4 sides vivid reddish orange colour
Floor area 41.05 m² (each liferaft)
Working pressure 0.017 MPa
Nominal weight 330 Kg
Roll container Length = 1660mm; Ø max.= 893mm; weight = 48 kg (tolerance 3%)
Inflation system for
each liferaft
2 bottle 14,0 litres capacity; mass CO2 = 8512 g; mass of Nytrogen = 448 g
Buoyancy and bottom materials: Polyester fabric coated with PVC on both sides 1100 Dtex - 640 g/m2 (black
and orange colored). Code 7324 (black/orange) manufactured by Mehler.



ATTACHMENT TO
CERTIFICATE No. MED066725CS
Page 2 of 3

Application / Limitation of use


25 P
50 P
100 P
Maximum installation height
18 m
Required towing force at 2 kts with one sea anchor deployed
0.84 kN
1.14 kN
1.37 kN
Required towing force at 3 kts with one sea anchor deployed
1.98 kN
2.88 kN
2.49 kN
Maximum number of persons allowed (82,5 Kg each)
25
50
100

Reference documents

Datasheet open reversible liferafts mod. FORC, n° 190.01, approved by RINA with n° CSST 24115;
General arrangement liferaft 25P, 50P and 100P, issued by ARIMAR and approved by RINA with n° CSST 9174, CSST 9175 and CSST 9176;
Liferaft Capacity 25PRA, 50P RA and 100P RA, issued by ARIMAR and approved by RINA with n° CSST 9177 and CSST 9178;
Fiberglass roll container 166, n°OMO-Z-406 appoved by RINA with n° CSST 9179;
Fiberglass roll container 118/B, n°OMO-Z-245 appoved by RINA with n° CSST 9180;
Inflation system: L-rafts inflation system approved as per RINA TA n° FPE164324CS;
Self draining water pocket , issued by ARIMAR and approved by RINA with n° FPE 7811 and CSST 9181;
Equipment packs, n° OMO-Z-405, approved by RINA with n° CSST 9182;
Test report n° 2012CS011810/DG issued in compliance with MSC 81(70), witnessed and filed by RINA with n° CSST 9184;
Booklet marking details trade mark Arimar/ Laliazas ssued by Lalizas Italia Srl and approved by RINA with n° CSST 18189 and CSST 18191.




ATTACHMENT TO
CERTIFICATE No. MED066725CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****