ELE008323XGENG
-
- -
N
-
NRGT 26-2s
-
N
-
S
-
S
-
-
02/03/2023
-
Prodotti Elettrici
-
-
S
N
-
N
-
Giuseppe Russo
-
N
- -
198,330
Giuseppe Russo
B
bis
Prodotti Elettrici
Numero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità
-
ELE008323XG
-
N
-
Mar 1, 2028
198330
Print Page
Form
Prodotti Elettrici
(
TO
)
Certification N.
ELE008323XG
- (
ENG
)
Certificate date
02/03/2023
Type
Impianti di Automazione
Product
Trasmettitori di livello
Model or Denomin.
Items
NRGT 26-2s
Applicant
GESTRA AG
View Certificate
Place of requester
Postfach 10 5460,%28054 Bremen % GERMANY
Tel. N.,Fax, Email
+4942135030, +494213503585, ---
Standards
- Rules for the Classification of Ships- Part C - Machinery, Systems and fire protection - Ch.3 ,Sect. 6 ,Tab. 1 .
Envelope N.
810
Expire date
01/03/2028
Head Office
Hamburg
Codice scelto:
Interrut.senza Dettaglio
Lingua certificato:
ENG
Sotto modulo:
Vuoto
Fase:
Querysave
Firma:
S
TYPE APPROVAL CERTIFICATE
No.
ELE008323XG
This is to certify
that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.
Description
Level transmitters
Type
NRGT 26-2s
Applicant
GESTRA AG
Postfach 10 5460,
28054 Bremen
GERMANY
Reference standards
- Rules for the Classification of Ships- Part C - Machinery, Systems and fire protection - Ch.3 ,Sect. 6 ,Tab. 1 .
.
This Certificate is valid until
March 1, 2028
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****
TYPE APPROVAL CERTIFICATE
No.
ELE008323XG
Enclosure - Page 1 of 1
NRGT 26-2s
Description :
NRGT26-2s consists of a level measuring electrode and a level transmitter integrated in the terminal box. It can be used to continually measure the water level in pressurized steam and hot-water plants, or in condensate and feed water tanks.
Level transmitter works according to the capacitance measurement principle, and is used for measurement of
levels in electrically conductive liquids.
The electrode rod and the vessel wall form a capacitor; in order to receive a high-quality measurement the measuring electrode must be installed in a protective tube.
Power supply: 24 V DC
Signal output : 4 to 20 mA
Service temperature: 0° C - 70° C
Degree of protection: IP65
Reference documents:
Installation and operating manual: 819876-02
Data Sheet: 819919-02
Test Reports:
BFSV # 2969/18 dated 22.12.2018 - vibration
Gestra Laboratory # 2020-G30-04 dated 23.03.2020 - environmental
TÜV Nord # 20139-3-R00 dated 13.07.2020 - EMC
TÜV Nord # 21164-5-R00 dated 08.09.2021 - EMC
TÜV Nord # 22102-5-R00 dated 28.10.2022 - EMC
Hamburg
March 2, 2023
**** NOTICE: This is NOT an official certificate ****