ELE052224XG!005ENG- -  -  N- RAYSTAT- EX-02 -N- S- S- -03/04/2024- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 1,051,913Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE052224XG/005- N-Apr 2, 20291051913
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE052224XG/005 - (ENG)
Certificate date 03/04/2024
Type Impianti Elettrici
Product TERMOSTATO

Model or Denomin.
Items
RAYSTAT- EX-02
Applicant nVent Thermal Belgium - nVent Thermal Belgium NV
Place of requester Romeinse straat 14  %  3001 Leuven  % BELGIUM
Tel. N.,Fax, Email ---, ---, Gerry.DeBlick@nVent.com
Standards RINA-Rules for the Classifications of Ships.
Expire date 02/04/2029
Head Office HAMBURG
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE052224XG/005
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description THERMOSTAT
Type RAYSTAT- EX-02
Applicant nVent Thermal Belgium - nVent Thermal Belgium NV
Romeinse straat 14
3001 Leuven
BELGIUM
Reference standards RINA-Rules for the Classifications of Ships.
  

 
 
   .   This Certificate is valid until April 2, 2029
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE052224XG/005
Enclosure - Page 1 of 1
RAYSTAT- EX-02
General Description:

Thermostat RAYSTAT–EX–02 is intended for temperature control of heating cables such as BTV, QTVR,
HTV and XTVR in hazardous areas.

- Enclosures
Body and lids: Laquered coated cast aluminum with stainless steel fittings and nitrile rubber internal lid seal.
Protection: IP65 if installed with Raychem cable glands GL-33 (armoured cable) or GL-34 (non armoured cable)
Lid fixing: Screw thread lid locked in place by a 2mm hexagonal key grub screw
Ambient operating temperature -40°C to +60°C

- Temperature sensing
Fluid filled bulb and capillary
Capillary 3 m long, bulb 197mm x 8 mm
Stainless steel (55316)
Exposure temperature -50 to +215°C
Max Capillary bend radius 15mm

- Switching
Single pole change over ( free voltage contact SPDT) ; Rating 22A @ 480Vac resistive loads

- Setting
Range: -4°C to 163°C ; Repeatability: ± 1,7 K; Differential: 5 K
Accuracy: (switch on): ±4.5°C at 21°C ambient and 50°C sensor temperature

- Connection terminals
Supply: 3 terminals for 1 to 4 mm2 ; Internal earth: single bolt for 1 to 4 mm2 conductors
External earth: single bolt and clamp for 1 to 4mm2 conductors

Reference documents:

- ATEX Certificate: 08 ATEX 6095X - Issue 7

Certification Authority: LCIE Bureau Veritas, Fontanay-aux-Roses (France)

Marking: II 2 G D, Ex db IIC T6 Gb, Ex tb IIIC T80°C Db IP 66

Safety Standard: EN 60079-0 (2012)+A11:2013; EN 60079-1 (2014) ; EN 60079-31 (2014)

- Data Sheet: RAYCHEM-DS-EU1427-TAYSTATEX02-EN


Remarks:
The Information listed in the present certificate are partial information based on the LCIE Certificates.
The component listed in this Certificate are to be used according to the manufacturer instructions:
Special conditions for safe use, according to the above referenced ATEX Certificate, are to be complied with.

The certificate supersedes previous RINA certificate No. ELE065119XG/005.

HAMBURG April 3, 2024
**** NOTICE: This is NOT an official certificate ****