MED471225CS!006ENGD- -  -  N- DM B0 / 1W AP DOUBLE BULKHEAD CONFIGURATION -N- S- S- -29/03/2026- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED471225CS/006- N-Mar 28, 2031254401
 
Form
  Marine Equipment(TO)
Certification N. MED471225CS/006 - (ENG)
Certificate date 29/03/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
DM B0 / 1W AP DOUBLE BULKHEAD CONFIGURATION
Applicant DE WAVE SRL
Place of requester VIA DE MARINI 1  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents IMO MSC/Circ.1046,IMO MSC.1/Circ. 1581,SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9
Request 17/10/2025
Expire date 28/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED471225CS/006

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type DM B0 / 1W AP DOUBLE BULKHEAD CONFIGURATION
Applicant DE WAVE SRL
VIA DE MARINI 1,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards IMO MSC/Circ.1046; IMO MSC.1/Circ. 1581; SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9
Issued in Genoa on
This Certificate is valid until
March 29, 2026
March 28, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED471225CS/006
Page 1 of 2

Product description

Bulkhead composed of two side by side bulkheads installed with, in between, a minimum air gap of 20 mm. Each bulkhead, consisting of panels having maximum width of 600 mm and maximum height of 2500 mm, is composed of a mineral wool layer with aluminium foil 15 mm thick and having density of 150 kg/m3, recognized as not combustible material as per FTP Code 2010, glued to a steel sheet having thickness of 0.7 mm. The mineral wool is glued to the steel sheet by means of 110 g/m2 of glue named ICEMA 145/75 or with 150 g/m2 of glue named DUNAPOL AD 4020. The panel joints consist of ā€œLā€ shaped sheet bent edges, locking by means of a further shaped profile and fixing by means of clinching points or screws fitted with maximum pitch of 680 mm. The panels are fixed by means of screws, on the perimeter, to U shaped steel containment profiles, having thickness of 1.5 and 2 mm.
Field of application
Fire resisting B-0 Class bulkhead for general application.
Reference documents
De Wave drawing No. DC-01-K1-16 dated 19 May 2019 approved on 30 March 2021 with endorsement No. LABS-2204.
Tests carried out
Tests as per RINA Test Laboratory reports No. 2015CS013408/1 issued on 27 October 2015 according to IMO 2010 FTP Code.




ATTACHMENT TO
CERTIFICATE No. MED471225CS/006
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****