FAB005525CFENG- -  -  N- Seamless steel tubes and pipes in austenitic and austenitic-ferritic(duplex) stainless steel -N- S- S- -28/05/2025- Fabbricanti Approvati- - SN- N- - S-  - 2,339,851BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB005525CF- N-Feb 24, 20302339851
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB005525CF - (ENG)
Certificate date 28/05/2025
Type Approvazione di fabbricanti di materiali
Product Tubi non saldati in acciaio austenitico ed in acciaio austeno-ferritico (duplex)

Model or Denomin.
Items
Seamless steel tubes and pipes in austenitic and austenitic-ferritic(duplex) stainless steel
RINA GRADE: 304L, 310S, 316TI/316L, 321, 410, UNS S32750, UNS N06625 AND UNS 8800
Applicant BLUMET TUBES PRIVATE LIMITED
Place of requester Survey No.150/003, Aldesan, Utnva Road, Aldesan, Kadi,
Mahesana, Gujarat, 382715  %  382715 Mahesana (Gujarat-24)  % INDIA
Tel. N.,Fax, Email ---, ---, jayesh@blumettubes.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 24/02/2030
Responsible Office RINA India Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB005525CF
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Seamless steel tubes and pipes in austenitic and austenitic-ferritic (duplex) stainless steel
Type Seamless steel tubes and pipes in austenitic and austenitic-ferritic(duplex)
stainless steel Nickel Alloys

RINA GRADE: 304L,310S,316TI/316L,321,410,UNS S32750,UNS N06625 AND UNS 8800
Applicant BLUMET TUBES PRIVATE LIMITED
Survey No.150/003, Aldesan, Utnva Road, Aldesan, Kadi,
Mahesana, Gujarat, 382715
382715 Mahesana (Gujarat-24)
INDIA
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until February 24, 2030
_________________________________
RINA Services S.p.A.
Sumit Kumar Paul
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB005525CF
Enclosure - Page 1 of 1
Seamless steel tubes and pipes in austenitic and austenitic-ferritic(duplex) stainless steel

APPROVAL CONDITIONS

Size range:
Outside diameter: 6mm to 219.10mm.
Wall Thickness: 0.70mm to 12.70mm.

Manufacturing Process: Cold Drawing Pilger Process.

Heat Treatment: Solution Annealing Stabilizing Heat Treatment

Grades: Min. Temperature:
304L 1040 deg. C
310S 1040 deg. C
316Ti/316L 1040 deg. C
321 1040 deg. C
410 1040 deg. C
S32750 1120 deg. C
N06625 1180 deg. C
N08800 1120 deg. C

Survey Conditions:
The pipes are to be in compliance with the requirements specified in Part D Ch 2 Sec 2 of the RINA Rules and are to be tested accordingly.

Note: The raw material to be provided by RINA approved manufacturer.


General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA India Marine May 28, 2025
**** NOTICE: This is NOT an official certificate ****