MED200326WS!002ENGF- -  -  N-  ISO799-Sxx-Lxx  -N- S- S- -28/07/2026- Marine Equipment- - SN- S- - N-  - 1,058,156B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED200326WS/002- N-Aug 17, 20281058156
 
Form
  Marine Equipment(TO)
MED668426WS/001,MED668426WS/003,MED668426WS/004,MED668426WS/005,MED668426WS/007
Certification N. MED200326WS/002 - (ENG)
Certificate date 28/07/2026
Type Apparecchi di navigazione
Product Pilot ladder
Item Nº MED/4.49

Model or Denomin.
Items
ISO799-Sxx-Lxx
Applicant JIANGSU NEWLAND SHIP EQUIPMENT CO., LTD.
Place of requester Jiangyan Economic Development Zone, Jiangyan City, Jiangsu Province, CHINA
Tel. N.,Fax, Email 13285268026, 0523 88060281, xdlmarine@163.com
Directive (EU) 2025/1533
Standards IMO Res.A.1045(27), as amended,ISO 799-1:2019.
Reference Documents SOLAS 74 Reg.V/23, as amended,IMO Res.A.1045(27),IMO MSC/Circ.1428.
Request 03/01/2026
Expire date 17/08/2028
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED200326WS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Navigation Equipment requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/4.49
Description Pilot ladder
Type ISO799-Sxx-Lxx
Applicant JIANGSU NEWLAND SHIP EQUIPMENT CO., LTD.
Jiangyan Economic Development Zone, Jiangyan City, Jiangsu Province, CHINA
Testing standards IMO Res.A.1045(27), as amended,ISO 799-1:2019.
Reference standards SOLAS 74 Reg.V/23, as amended; IMO Res.A.1045(27); IMO MSC/Circ.1428.
Issued in SHANGHAI on
This Certificate is valid until
July 29, 2026
August 17, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Qiang Sun
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED200326WS/002
Page 1 of 2

PRODUCT DESCRIPTION


- The pilot ladder is assembled with side rope on each side continuous from the top of the ladder to the
bottom (manila rope meeting ISO 1181:2004).

- Each step is supported by each side rope.

- Steps:

The four lowest steps are made of rubber material. LXBXH (525X115X25, at thinnest point) mm.

The remaining steps except spreader steps are made of hard wood. LXBXH (525X115X25, at thinnest point) mm.

The spreader steps are made of hard wood. LXBXH (1800X115X25, at thinnest point) mm.

- Each side rope has a breaking strength of at least 24 kN.

- Length of ladder: 3~28 m.


REFERENCE DOCUMENTS

Technical drawings approved and filed by RINA listed on Approval letter No. : SHFP/2026/779/ZW002 & SHFP/2026/839/ZW002.

TESTS CARRIED OUT

Pilot ladder has been tested in compliance with ISO 799-1:2019, and test report is filed by RINA with
No.: SHFP-38631.

REMARKS

- The ladder is designed in compliance with IMO Res. MSC.576(110).

- Each ladder is to be marked in compliance with ISO 799-1:2019, Clause 8.


NOTE

This certificate annuls and replaces the Previous EC Type Examination (Module B) Certificate
No.: MED664725WS/002 dated 10/20/2025 due to below modification:

- Side ropes are changed from sisal rope to manila rope.

- The maximum length of the ladder is reduced from 30 m to 28 m.





ATTACHMENT TO
CERTIFICATE No. MED200326WS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Qiang Sun
**** NOTICE: This is NOT an official certificate ****