FAB053925CFENG- -  -  N-  -N- S- S- -09/11/2025- Fabbricanti Approvati- - SN- N- - S-  - 0BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB053925CF- N-Nov 30, 20300
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB053925CF - (ENG)
Certificate date 09/11/2025
Type Approvazione di fabbricanti di materiali
Product Tubi e fittings in acciaio

Model or Denomin.
Items

SEAMLESS TUBES & PIPES AND FINISH MACHINED FORGED FLANGES AND FORGED BARS IN STAINLESS STEEL
Applicant VIRAJ PROFILES PRIVATE LIMITED
Place of requester (Pipe Division) % Survey No.110,114/1B,114/D/2,115/2E & 116, Village-Mahagaon,Boisar,Palghar(Dist),Maharashtra-401501, (Forging Divsion) % G-2,23, 75,Survey No.140/1,Saravali,MIDC Tarapur Industrial Area,Boisar,Palghar(Dist),Maharashtra-401506
Tel. N.,Fax, Email +91 9049991347, Vijay.Pillai@viraj.com
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents RINA Rules
Expire date 30/11/2030
Responsible Office RINA India Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB053925CF
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel pipes and fittings
Type
SEAMLESS TUBES & PIPES AND FINISH MACHINED FORGED FLANGES AND FORGED BARS IN STAINLESS STEEL
Applicant VIRAJ PROFILES PRIVATE LIMITED
(Pipe Division)
Survey No.110,114/1B,114/D/2,115/2E & 116, Village-Mahagaon,Boisar,Palghar(Dist),Maharashtra-401501, (Forging Divsion)
G-2,23, 75,Survey No.140/1,Saravali,MIDC Tarapur Industrial Area,Boisar,Palghar(Dist),Maharashtra-401506
Reference standards RINA Rules for the approval of manufacturers of materials
Reference documents RINA Rules
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until November 30, 2030
_________________________________
RINA Services S.p.A.
Sumit Kumar Paul
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB053925CF
Enclosure - Page 1 of 1

APPROVAL CONDITIONS

FORGING DIVISION:
GradeNon-RINA Austenitic Stainless Steels
Melting PracticeInduction Furnace
Casting PracticeIngot Casting, Continuous Casting
Maximum Weight15,000 kg
Maximum Thickness / Diameter300 mm
Heat Treatment FacilityN/A
Product ExamplesIngot, Billet, Round Cornered Square
GradeNon-RINA Austenitic Stainless Steels
Melting PracticeInduction Furnace
Casting PracticeIngot Casting, Continuous Casting
Manufacturing ProcessODF / CDF / Rolled Forging
Maximum Weight1,200 kg - flange and 2250 kg/meter - forged bars
Maximum Thickness/Diameter600 mm
Heat Treatment FacilityIn-House
ProductsFlange, Forged Bar
NOTE: Weld repair is generally not permitted, unless specially approved by the RINA Office.
PIPING DIVISION:
GradeNon-RINA : Austenitic Stainless Steels
Melting PracticeInduction Furnace
Casting PracticeIngot Casting, Continuous Casting
Maximum Weight15,000 kg
Maximum Thickness/Diameter300 mm
Heat Treatment FacilityN/A
Product ExamplesIngot, Billet, Round Cornered Square
GradeNon-RINA: Austenitic Stainless Steels
Melting PracticeInduction Furnace
Casting PracticeIngot Casting, Continuous Casting
Manufacturing ProcessHot Piercing/Cold Pilgering and Cold drawn
Maximum Weight70 Kgs/meter
Maximum Thickness/DiameterTHK. 18.26 & OD 168.3 mm
Heat Treatment FacilityIn-House
ProductsSeamless steel tubes and pipes
NOTE: Weld repair is generally not permitted, unless specially approved by the RINA Office.
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.


RINA India Marine 09.11.2025
**** NOTICE: This is NOT an official certificate ****