Single leaf sliding door whose maximum clear opening size is 2383 mm (W) and 2707 mm (H). The leaf, having maximum dimensions of 2497 mm in width and 2719 mm in height, is made of one single panel of a composite material. The panel is composed of three skins of material named NEPTUNE BOARD or named CARETTA BOARD, 2 mm thick each and having density of 1200 kg/m3 and, in between, two layers of mineral wool type ROCKWOOL SEAROX SL400-490, 20 mm thick and having density of 160 kg/m3. Vertical stiffeners made of NEPTUNE BOARD or CARETTA BOARD are fitted, between the two skins, every 100 mm. The composite panel edge is contained within two U shaped steel profiles having dimensions 40x42x40x1.25 mm and 30x48x30x1 mm. The edges of the leaf are fitted with intumescent strips type KERAFIX FLEXPAN 200 having dimensions of 15x1.5 mm. The steel sliding guide is 25 mm wide and 24 mm deep with a thickness of 1.4 mm. The sliding guide is supported by four steel brackets 6 mm thick and insulated with 2.5 mm of NEPTUNE BOARD or CARETTA BOARD on all the surface; it is fixed to the bulkhead by means of four M8x40 bolts.
The door may be equipped with a self-closing hose port.
The door may also be equipped with a window having maximum clear light of 650 mm in width and 650 mm in height. The glass, type PYROBEL EI60, has nominal thickness of 25.5 mm. The glass retaining frame, made of steel profiles having thickness of 2 mm and 1.25 mm, is fixed to the leaf by means of screws type M6x25 every 180 mm. Between the frame and the glass retaining frame ceramic tapes 30x5 mm are fitted; the glass retaining frame is also provided with a layer of Neptune Board 30x12 mm.
The door without window may be installed on A60 aluminium bulkhead or A60 steel bulkhead.
The door fitted with window may be installed only on A60 steel bulkhead.
|
ATTACHMENT TO
CERTIFICATE Nr. MED020924CS/001
Page 2 of 3 |
Field of application
· Door without window:
Fire resistant A-60 Class single leaf sliding door with the fire hazard on both sides in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
· Door fitted with window:
Fire resistant A-60 Class single leaf sliding door with the fire hazard on the side fitted with the sliding guides.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf;
- maximum door size tested;
- door used with a fire tested frame design.
Reference documents · PANMERC ENTERPRISES LTD drawing No. SSF-60-120 Rev. B dated 17 February 2015 approved on 30 October 2015 with endorsement No. LABS-1153.
· PANMERC ENTERPRISES LTD drawing No. SSF-60-150 Rev. A dated 30 March 2015.
Tests carried out
Test as per RINA Test Laboratory reports:
· No. 2014CS013398/2 and 2014CS013398/3 issued on 30 October 2015 according to IMO 2010 FTP Code Part 3;
· No. 2016CS01980/1 issued on 5 April 2017 according to IMO 2010 FTP Code Part 3. |