FAB162023GEENG- -  -  N- Grade A , AH32, AH36, DH32, DH36 -N- S- S- -06/12/2023- Fabbricanti Approvati- - SN- N- - S-  - 205,404BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB162023GE- N-Dec 6, 2028205404
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB162023GE - (ENG)
Certificate date 06/12/2023
Type Approvazione di fabbricanti di materiali
Product Normal strenght and higher strenght structural steel plates

Model or Denomin.
Items
Grade A , AH32, AH36, DH32, DH36
Applicant F.I.L. FABBRICA ITALIANA LAMIERE S.R.L.
Place of requester VIA GALLINO NATALE 63  %  16164 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010 7720992, 010 7720802, ---
Standards RINA Rules for the approval of manufacturers of materials
Expire date 06/12/2028
Responsible Office GENOVA
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB162023GE
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Normal strength and higher strength structural steel plates
Type Grade A , AH32, AH36, DH32, DH36
Applicant F.I.L. FABBRICA ITALIANA LAMIERE S.R.L.
VIA GALLINO NATALE 63
16164 Genova (GE)
ITALY
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until December 6, 2028
_________________________________
RINA Services S.p.A.
Michele Fusco
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

FAB162023GE
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
Grade A, AH32, AH36, DH32, DH36

APPROVAL CONDITIONS


Cast slabs produced by approved Manufacturers

Steel making : BOC Basic Oxygen converter -EAF Electric arc furnace

Casting process: CC Continuous casting - IC Ingot casting

Deoxidation practice, condition of supply and thickness:

Steel Grade
Deoxidation practice and fine grained elements
Condition of supply and max thickness
A
Killed - Al
AR, N , CR-NR Plates 40 mm
AH32 - DH32
Killed - Al
AR, N , CR-NR Plates 40 mm
AH36 - DH36
Killed - Al
AR, N , CR-NR Plates 40 mm

Survey conditions:

The plates are to be in compliance in in all all respects with the relevant RINA rules and are to be tested accordingly.

General conditions for the approval:

-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.

RINA is to be notified of any change of materials, manufacturing process quality control routines that may affect the validity of this certificate.



 RINA Genova Marine,06/12/2023
**** NOTICE: This is NOT an official certificate ****