FAB241625PUENG- -  -  N- Grey and nodular iron castings -N- S- S- -16/12/2025- Fabbricanti Approvati- - NN- N- - S-  - 1,092,563BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB241625PU- N-Dec 15, 20301092563
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB241625PU - (ENG)
Certificate date 16/12/2025
Type Approvazione di fabbricanti di materiali
Product Fusi in ghisa

Model or Denomin.
Items
Grey and nodular iron castings
Applicant GAON CASTEC CO., LTD.
Place of requester 10-50 Dasansandan 2-gil, Dasan-myeon  %  40113 Goryeong-gun (Gyeongsangbuk-do)  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 54 956 0211, +82 54 956 0212, cast66@naver.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 15/12/2030
Responsible Office BUSAN
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB241625PU
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Iron castings
Type Grey and nodular iron castings
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until December 15, 2030
_________________________________
RINA Services S.p.A.
Taewook Han
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB241625PU
Enclosure - Page 1 of 1
Grey and nodular iron castings

APPROVAL CONDITIONS



The chemical composition and the mechanical properties are to be in accordance with the RINA
requirements or equivalent recognized standards.


Iron types : -Grey Cast Iron with minimum tensile strength not higher than 300 N/mm2
-Nodular Cast Iron with minimum tensile strength not higher than 700 N/mm2

Products Max. weight : 3,800 kg(Grey Cast Iron) / 2,100 kg(Nodular Cast Iron)


Survey conditions: all castings to be used for construction of ships and machinery classed with RINA
shall meet the requirements of the RINA Rules and shall be tested accordingly.






General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

BUSAN December 16, 2025
**** NOTICE: This is NOT an official certificate ****