ELE238025XG!001ENG- -  -  N- MEC24-A, MEC24-S, MEC24-H, MEC24-B -N- S- S- -10/09/2026- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 0Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE238025XG/001- N-Nov 10, 20300
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE238025XG/001 - (ENG)
Certificate date 10/09/2026
Type Impianti di Automazione
Product Sistema di comando, sicurezza e monitoraggio per motori Diesel

Model or Denomin.
Items
MEC24-A, MEC24-S, MEC24-H, MEC24-B
Applicant LINDENBERG ANLAGEN GMBH
Place of requester HOFFNUNGSTHALER STRASSE 41  %  51491 OVERATH  % GERMANY
Tel. N.,Fax, Email +49 2205 8009 122, +49 2205 8009 109, Udo.Loosen@lindenberg-anlagen.de
Standards RINA Rules for the Classification of Ships - Part C- Machinery, Systems and Fire Protection - Ch.3 , Sect. 8, Table 1
Expire date 10/11/2030
Head Office Hamburg
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE238025XG/001
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Control, safety and monitoring system for Diesel engines
Type MEC24-A, MEC24-S, MEC24-H, MEC24-B
Applicant LINDENBERG ANLAGEN GMBH
HOFFNUNGSTHALER STRASSE 41
51491 OVERATH
GERMANY
Reference standards RINA Rules for the Classification of Ships - Part C- Machinery, Systems and Fire Protection - Ch.3 , Sect. 8, Table 1
  

 
 
   .   This Certificate is valid until November 10, 2030
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE238025XG/001
Enclosure - Page 1 of 2
MEC24-A, MEC24-S, MEC24-H, MEC24-B
...MEC24-A; Alarm System and Start-/Stop Unit:

- 6 analog inputs 4...20mA
- 6 analog inputs PT100; PT1000
- 1 RPM input, galvanic isulated
- 2 add. binary inputs
- 6 binary inputs for control
- 2 voltage inputs for fuse trip and charging alternator
- 2 voltage inputs for speed up/down
- 8 binary relay outputs 6A
- 2 binary transistor outputs (with wire brak monitoring)
- 1 voltage output 1...5V/1...10V
- 2 status-LEDs

Interfaces: 2 CAN bus, RS232 diagnostic, serial for I/O extensions
Power supply: 24 VDC
Degree of protection: IP 20
Software version: 4.2.x, 3.12.x



MEC24-S; Safety System:

- 2 emergency stop inputs with wire brak monitoring
- 5 binary inputs for automatic shut down with wire brak monitoring
- 5 binary inputs for control (reset, override...)
- 1 RPM input, galvanic isolated
- 4 binary outputs, 6A
- 2 transistor outputs 8A, with wire brak monitoring
- 1 transistor output 8A, short-circuit-proof with wire break monitoring
- 1 current output 4...20 mA
- 2 status LEDs
- 8 alarm LED for override, emergency stop, overspeed and 5 other safety stop criteria

Interfaces: 1 CAN Bus for communication with MEC24-A, MEC24-H, MEC24-B, serial output
Power supply: 24 VDC
Degree of protection: IP 20
Software Version: 1.19











TYPE APPROVAL CERTIFICATE
No. ELE238025XG/001
Enclosure - Page 2 of 2
MEC24-A, MEC24-S, MEC24-H, MEC24-B
MEC24-H (local); MEC24-B (bridge) Operator Panel:

- 5.7"colour display with automatic dimmed illumination
- Indication of most important analog engine parameters on each page
- engine status indication
- alarm pages for acknowledged and unacknowledged alarms
- membrane keys for engine start/stop, buzzer stop, acknowledgement, reset and page selection
- buzzer
- CAN interfaces for communication with MEC24-A and MEC24-S

Power supply: 12 VDC
Degree of protectio : IP 20; front side IP 44
Software version: 1.32.x

AHD-R101: Relay Station with 15 relays and serial control

Technical description:
  • Performance test protocol ver.8.3- MEC24
  • Drawings: No. 01 Block Diagram MEC24-A and 02 Block Diagram MEC24-S
  • Operating Manual, Doc. No.: 000.027
  • Operating Manual for relay station



Test report:
  • Zeiss Document No. P-QK/EMV 060/2009
  • paconsult Test Report no. 09-2664 and 09-2665
  • Performance test protocol ver. 8.3, dated of 21.06.2010
  • SLG EMC Test Report dated 22.07.2020


This certificate supersede ELE238025XG.

Hamburg September 10, 2026
**** NOTICE: This is NOT an official certificate ****