Double leaf hinged door whose maximum clear opening size is 3180 mm wide and 2880 mm high. Each leaf, having maximum dimensions of 1610x2897 mm (WxH) and thickness of 63 mm, is composed of two carbon steel sheets, 1.5 mm thick each and, in between, the insulating material compound. This compound, symmetric, is composed of one layer of material type RIGIDUR MARINE 10 H (manufacturer Saint-Gobain), 10 mm thick and having density of 1200 kg/m3, one layer of product named PROMAGLAF GM (manufacturer Promat), having thickness of 9.6 mm and density of 165 kg/m3, one layer of mineral wool named ULTIMATE 76 (manufacturer Isover Saint-Gobain), 20 mm thick and having density of 76 kg/m3, one layer of PROMAGLAF GM and one layer of RIGIDUR MARINE 10 H. The insulating materials are glued together and to the steel sheets by means of 250 g/m2 of adhesive type ISOVER PROTECT BSK (manufacturer Saint-Gobain Isover). Each leaf is fitted, inside, with U profiles type 40x35 UNI 5786; four profiles are tack welded, on the leaf perimeter, to the steel sheets whereas one profile per each leaf, tack welded at the top and at the bottom, is fitted in vertical position at a distance of 120 mm from the central rabbet. Between this profile and the leaf edge, three layers of material named PROMATECT H (Manufacturer Promat), 20 mm thick each and having density of 870 kg/m3, are fitted; the layer positioned in the center is shifted 20 mm to the direction of the U shaped profile, in order to allow the movement of the closing bars having diameter of 10 mm. On the external side the leaves are fitted, on the perimeter, with U shaped closing profiles having thickness of 1.2 mm. Each leaf is fitted with a lever closing device, fitted inside the leaf and actuated by a handle, which acts on four points on the primary leaf (three latches and one bar having diameter of 10 mm) and two points on the secondary leaf (two bars). The door is fitted, on the rabbet, with two closing steel profiles having thickness of 1.2 mm fixed to the leaves by means of M5 screws and forming, externally, a hollow space filled with PROMAGLAF GM. The rabbet is completed with intumescent gaskets type PROMASEAL PL 20x2.5 mm (manufacturer Promat). The four-sides door frame is composed of steel profiles having thickness of 5 mm, welded to the bulkhead; three sides are insulated with three layers of mineral wool type SEAROX SL470 (manufacturer Rockwool) having, each, thickness of 35 mm and density of 180 kg/m3. An additional layer of insulation type PROROX SL 970 (manufacturer Rockwool) 50 mm thick and having density of 115 kg/m3 is fitted around the door frame for a width of 300 mm. The upper profile of the door frame is completed with intumescent gasket type PROMASEAL PL 20x2.5 mm. The door may be fitted, on the primary leaf, with a self-closing hose port, having maximum dimensions of 195x165 mm, composed of steel sheets 1.2 mm thick and fitted, inside, with the same insulating material compound as the leaves. In this case the edges of the leaf around the hose port are fitted with intumescent gaskets type PROMASEAL PL 20x2.5 mm.
|
ATTACHMENT TO
CERTIFICATE No. MED370923CS
Page 2 of 3 |
Field of application Fire resistant A-60 Class double leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested
- door used with a fire tested frame design
The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents Naval Suppliers drawing No. FT_HA62_3180x2880 rev. 1 dated 30 October 2023 enclosed to Efectis Nederland BV Test Laboratory report No. 2024-Efectis-R000003[Rev.1].
Tests carried out Test as per Efectis Nederland BV Test Laboratory report No. 2024-Efectis-R000003[Rev.1] issued on May 2024 according to IMO 2010 FTP CODE. |