|
 |
ATTACHMENT TO
|
CERTIFICATE No. MED099726VE
|
|
|
|
|
|
|
|
|
|
|
|
|
| Place of unit verification |
|
|
|
| Venezia - Italy,, |
|
|
|
Verified components of the equipment (with serial
number) |
|
|
|
241917-MDD-100 [ME 1 sn XAAE678348 of IMO 1077000] 241917-MDD-200 [ME 2 sn XAAE678351 of IMO 1077000] |
|
|
|
|
|
|
|
| Technical documentation |
|
|
|
PRMT-24691 approved on 29 April 2026 - Scubber Layout DG1 PRMT-24692 approved on 29 April 2026 - Scubber Layout DG2 PRMT-24693 approved on 29 April 2026 - Detox Tower 241917 PPI-001-03 PRMT-24694 approved on 29 April 2026 - Main Pump PPI-009-05 approval letter PRMT/2026/156/RSPTZ
PRMT-24371 approved on 20 February 2026 - Visentini 235 ETM-B - 27 Nov 2025 PRMT-24372 approved on 20 February 2026 - Visentini 235 OMM - 27 Nov 2025 PRMT-24373 approved on 20 February 2026 - Visentini 235 SECP - 27 Nov 2025 PRMT-24415 approved on 20 February 2026 - CN Visentini Record Book 28 Feb 2025 approval letter PPVT/2026/46/RSPTZ -------------- ECO-ECG System DeSOx consisting of the verified components listed in "Visentini 235 ETM-B - 27 Nov 2025" approved with RINA No. PRMT-24371 approved on 20 February 2026. -------------- Tests carried out: EGCS Survey Report No. Visentini_C235_EGCS TEST REPORT relevant to tests carried out on 19/05/2026 Analysis Report relevant to tests No. VE26-00412_0 dated 08/06/2026.
|
Limitation on the acceptance or use of the
product
1-In scheme B, according to MEPC.340(77), compliance with emission requirements is demonstrated by continuous exhaust gas monitoring.
2-EGCS acceptance and use to be within the terms and conditions of “Procedure for Compliance” at Para. 6 of PRMT-24373 approved on 20 February 2026 - Visentini 235 SECP - 27 Nov 2025" .
3-Monitoring system is subject to periodic surveys by RINA according to MEPC.340(77).
4-This certificate is issued on the basis of test carried out while main engines running only on fuel with maximum content of sulfur not greater than 2.00% at 85% MCR.
5-This document anuls and replaces the previously issued Module G MED135124VE
____________________________ |
|
|
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA |
|
|
|