Press fittings for different applications made from stainless steel AISI 316L (1.4404) or AISI 316 (1.4408) with nominal diameters of 15 mm up to 108 mm and with wall thickness of 1.0 mm to 2.0 mm. Fittings are sealed with a synthetic rubber O-ring and to be assembled by pressing tool.
Shaped fittings from galvanized carbon steel E195 (1.0034) with nominal diameters of 12 mm up to 108 mm and with wall thickness of 1.0 mm to 2.0 mm. Fittings are sealed with a synthetic rubber O-ring and to be assembled by pressing tool.
Press Fittings stainless steel - Technical Data
Type | Dimension / Diameter | Working Pressure | Fitting Material | Gasket material |
Nirosan
Serie 9000 | 15 mm - 108 mm | max. 16 bar | AISI 316L / 1.4404
AISI 316 / 1.4408 | EPDM |
Nirosan Gas
Serie 17000 | 15 mm - 108 mm | max. 16 bar | AISI 316L / 1.4404
AISI 316 / 1.4408 | HNBR |
| Nirosan Industry Serie 18000 | 15 mm - 108 mm | max. 16 bar | AISI 316L / 1.4404
AISI 316 / 1.4408 | FKM |
Press Fittings carbon steel - Technical Data
Type | Dimension / Diameter | Working Pressure | Fitting Material | Gasket material |
SANHA-Therm
Serie 24000 | 12 mm - 108 mm | max. 16 bar | E195 (1.0034) | EPDM |
SANHA-Therm Industry
Serie 28000 | 12 mm - 108 mm | max. 16 bar | E195 (1.0034) | FKM |
Pipes:
Type: NiroSan Systemrohr Serie 9000 and F Serie 9700, compliant to EN 10312
NiroSan Systemrohr 9600 NiroSan-Eco, NiroTherm Systemrohr Serie 9100, compliant to EN 10312
Externally galvanized carbon steel SANHA-Therm Serie 24000
Complete galvanized carbon steel SANHA-Therm DZ Serie 24000-DZ
Material: Stainless Steel AISI 316(L) (1.4404 & 1.4408), Stainless Steel AISI 304 (1.4301) or AISI 444 (1.4521)
Carbon Steel E195 (1.0034)
Page 3 of 3
The temperature range for the fittings are limited by selected soft seal material.
Gasket material Temperature
EPDM -30°C up to +120°C
HNBR -20°C up to +70°C
FKM -20°C up to +200°C
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.