DIP432725CSBIL- -  -  N- Oblò fisso e non facilmente apribile - 565x830 mm,Fixed and not easy openable portlight - 565x830 mm -N- S- S- -21/04/2026- Prodotti per nautica diporto- - NN- N- Stefano Moscatelli- N-  - 1,057,545Stefano MoscatelliBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP432725CS- N-Sep 11, 20281057545
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP432725CS - (BIL)
Certificate date 21/04/2026
Product Portellino di murata per unità da diporto

Model or Denomin.
Items
Oblò fisso e non facilmente apribile - 565x830 mm,Fixed and not easy openable portlight - 565x830 mm
OBM.SL565830.01 / FBM.SL565830.01
Applicant SCM Marine Equipment S.r.l. Unipersonale
Place of requester Strada per Cascina Restelli, 6  %  20886 Aicurzio (MB)  % ITALY
Tel. N.,Fax, Email +39 039 302181, ---, uc@scminox.it
Directive NONE
Standards RINA rules for the Classification of Yachts
Expire date 11/09/2028
Responsible Office VIAREGGIO
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP432725CS
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Portellino di murata per unità da diporto
Description Side Scuttle for Pleasure Vessels
Tipo Oblò fisso e non facilmente apribile - 565x830 mm
Fixed and not easy openable portlight - 565x830 mm
Type OBM.SL565830.01 / FBM.SL565830.01
Norme di riferimento RINA rules for the Classification of Yachts
Reference standards RINA rules for the Classification of Yachts








_________________________________
RINA Services S.p.A.
  
Giuseppe TianoStefano Moscatelli
       
Rilasciato a VIAREGGIO il 21  Aprile  2026.  Questo Certificato è valido fino al 11 Settembre 2028
   
Issued in VIAREGGIO  on April 21, 2026. This Certificate is valid until September 11, 2028
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
DIP432725CS
Allegato - Pagina 1 di 1
Enclosure - Page 1 of 1
Oblò fisso e non facilmente apribile - 565x830 mm,Fixed and not easy openable portlight - 565x830 mm
Product description / Descrizione del prodotto.
Fixed and not easy openable portlight: dim. 565x830 mm.
Portellino di murata fisso e non facilmente apribile: dim. 565x830 mm.

Reference documents / Documenti di riferimento.
Drawings approved with nr. DIP/103261 and DIP/103262.
Disegni approvati con n° DIP/103261 e DIP/103262.

Tests: technical reports filed with job RS/2025/CS/01/4327.
Prove: rapporto tecnico archiviato su pratica RS/2025/CS/01/4327.

General acceptance conditions / Condizioni di accettazione generali.
1) Shop test: an hydraulic test shall be carried out before despatch by means of batch test. For each batch at least two portlights, within no. 10 portlights produced, shall be tested.
1) Test presso il fabbricante: per ogni lotto deve essere effettuata una pressatura idrostatica prima della spedizione. Per ogni lotto di 10 portellini devono essere collaudati almeno due portellini di murata.

2) The portlight will be supplied from the Manufacturer with installation manual.
2) Il Fabbricante deve fornire il portellino di murata con il manuale di installazione.

Particular acceptance conditions / Condizioni di accettazione particolari.
3) The portlight is suitable for installation on board of yachts having length between perpendicular (corresponding to full load waterline) < 50 m for motor yachts and < 40 m for sailing yachts.
3) Il portellino di murata è idoneo per installazione a bordo di unità aventi lunghezza fra le perpendicolari (corrispondente al galleggiamento di massimo carico) < 50 m per unità a motore e < 40 m per unità a vela.

4) The portlight is suitable, without deadlight, for installation in the following zones (see the figure below): 1a, 2a, 1b and 2b if equivalence between the proposed interlayer and the interlayer foressen by RINA Rules (3mm polycarbonate) will be given to the attending RINA Surveyor.
Reference: RINA Rules for the Classification of Yachts Pt. B, Ch. 1, Sec. 1, [5.6.4] and [5.6.17].

4) Il portellino è idoneo, senza corazza, per installazione nelle seguenti zone (vedere la figura riportata di seguito): 1a, 2a, 1b and 2b se verrà fornita al Tecnico RINA l'equivalenza tra l'interstrato proposto e quello previsto dal regolamento di classe RINA (3mm di policarbonato). Riferimento: RINA Rules for the Classification of Yachts Pt. B, Cap. 1, Sez. 1, [5.6.4] e [5.6.17].

5) For installation in the following zones (see the figure below): 1a, 2a, 1b and 2b the portlight is to be fixed or not easy
openable. Reference: RINA Rules for the Classification of Yachts Pt. B, Ch. 1, Sec. 1, [5.6.2].
5) Per installazione nelle seguenti zone (vedere la figura riportata di seguito): 1a, 2a, 1b e 2b l'oblò dovrà essere fisso o non
facilmente apribile. Riferimento: RINA Rules for the Classification of Yachts Pt. B, Cap. 1, Sez. 1, [5.6.2].

6) For yachts designed for commercial use, the exemption for the use of deadlight in any zone is to be always confirmed by the Flag Authority.


6) Per unità in servizio commerciale, l'esenzione per l'uso della corazza in qualsiasi posizione deve essere sempre confermata dall'Autorità di Bandiera.

7) It is to be verified that the pressures p1, p2 and p3, as calculated according to the rule's formulas, are less than 70 kN/m^2.
7 Deve essere verificato che le pressioni p1, p2 e p3, come calcolate mediante le formule regolamentari, siano inferiori a 70 kN/m^2.


 Viareggio, 21 Aprile 2026 
 Viareggio April 21, 2026
**** NOTICE: This is NOT an official certificate ****