MED331923WSENG- -  -  N- FH70-2 -N- S- S- -26/09/2024- Marine Equipment- - NN- S- - N-  - 86,359B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED331923WS- N-Sep 25, 202986359
 
Form
  Marine Equipment(TO)
Certification N. MED331923WS - (ENG)
Certificate date 26/09/2024
Type Mezzi di salvataggio
Product Dispositivi di messa a mare per imbarcazioni di salvataggio a caduta libera
Item Nº MED/1.23

Model or Denomin.
Items
FH70-2
Applicant CSSC LUZHOU ZHENJIANG MARINE AUXILIARY MACHINERY CO., LTD.
Place of requester 56# Yuehe Street, Jianbi Town  %  212006 Zhenjiang (Jiangsu)  % CHINA
Tel. N.,Fax, Email 0086 13655286626, ---, ---
Directive (EU) 2024/1975
Standards IMO Res. MSC.81 (70) as amended
Reference Documents Reg. III/4, III/16, III/23, III/24, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC code) 8 - IMO Res. MSC.48(66) (LSA code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Expire date 25/09/2029
Head Office SHANG HAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED331923WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.23
Description Launching appliances for free-fall lifeboats
Type FH70-2
Applicant CSSC LUZHOU ZHENJIANG MARINE AUXILIARY MACHINERY CO., LTD.
56# Yuehe Street, Jianbi Town,212006 Zhenjiang (Jiangsu),CHINA
Testing standards IMO Res. MSC.81 (70) as amended
Reference standards Reg. III/4, III/16, III/23, III/24, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC code) 8 - IMO Res. MSC.48(66) (LSA code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8 - RINA Rules for the certification of Marine Equipment
Issued in SHANG HAI on
This Certificate is valid until
September 26, 2024
September 25, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED331923WS
Page 1 of 2

TECHNICAL DATA

Product Description:
- Launching appliance for free-fall lifeboat
- Length of ramp: 9120 mm
- Breadth (inner): 2770 mm
- Maximum Working Load: 70 kN
- Maximum Hoisting Load: 51 kN
- Minimum Working Load: 43 kN
- Angle of ramp: 35 degrees
- Secondary means of launching:
Hydraulic winch type FH
Steel wire with diameter of 20 mm

- Limitations on the acceptance or use of the product
Trim up to 10 degrees and list up to 30 degrees;
Trim up to 2 degrees and list up to 5 degrees for the secondary means of launching the
lifeboat
- Arrangement/positioning of launching appliance on board of ship shall be in compliance
with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- Reference is to be made to approved drawing SHST-47785 and relevant test report.
REFERENCE DOCUMENTS
Dwg. no. Title
SHST-47785 FH70-2 Launching Appliance

TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) (as amended), test carried out on 2024/September/24.




ATTACHMENT TO
CERTIFICATE No. MED331923WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****