MED144926CSENG- -  -  N-  PROTOPUR AE 500/2C -N- S- S- -17/03/2026- Marine Equipment- - SN- S- - N-  - 529,980B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED144926CS- N-Mar 16, 2031529980
 
Form
  Marine Equipment(TO)
Certification N. MED144926CS - (ENG)
Certificate date 17/03/2026
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (e) adhesives used in the construction of 'A', 'B' & 'C' class divisions
Item Nº MED/3.18e

Model or Denomin.
Items
PROTOPUR AE 500/2C
Applicant COLLANTI CONCORDE SRL
Place of requester VIA SCHIAPARELLI 12 Z.I.  %  31029 Vittorio Veneto (TV)  % ITALY
Tel. N.,Fax, Email 0438 912121, 0438 901822, INFO@COLLANTICONCORDE.IT
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/9, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120
Request 25/02/2026
Expire date 16/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED144926CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.18e
Description Surface materials and floor coverings with low flame-spread characteristics: (e) adhesives used in the construction of 'A', 'B' & 'C' class divisions
Type PROTOPUR AE 500/2C
Applicant COLLANTI CONCORDE SRL
VIA SCHIAPARELLI 12 Z.I.,31029 Vittorio Veneto (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/9, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120
Issued in Genoa on
This Certificate is valid until
March 17, 2026
March 16, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED144926CS
Page 1 of 2

Product description


Two-component polyurethane glue (colour: white).
  • Mass per area (g/m2): 300 ± 10%
  • Thickness (mm): 0.2 ±10%

Field of application

As adhesive.

On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.

Tests carried out

Tests as per RINA Test Laboratory reports Nos. 2026CS011449/1 and 2026CS011449/2 dated 17 March 2026 issued according to:
  • IMO 2010 FTP Code Part 5
  • ISO 1716: 2010




ATTACHMENT TO
CERTIFICATE No. MED144926CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****