MED260923CS!004ENGD- -  -  N- SCUPPER TO WELD WITH HORIZONTAL AND VERTICAL OUTLET TURBO DRAIN -N- S- S- -20/07/2023- Marine Equipment- - SN- S- - N-  - 1,203,751B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED260923CS/004- N-Jul 19, 20281203751
 
Form
  Marine Equipment(TO)
Certification N. MED260923CS/004 - (ENG)
Certificate date 20/07/2023
Type Protezione antincendio
Product Penetrations through "A" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Item Nº MED/3.26b
USCG Category N° 164.138

Model or Denomin.
Items
SCUPPER TO WELD WITH HORIZONTAL AND VERTICAL OUTLET TURBO DRAIN
Applicant CHIBRO Srl Società con socio unico
Place of requester Via Valtellina, 15  %  22070 Montano Lucino (CO)  % ITALY
Tel. N.,Fax, Email 0314781800, ---, pcrescini@rubinetteriebresciane.it
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1488
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 07/07/2023
Expire date 19/07/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED260923CS/004

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.26b
USCG Category Nº 164.138
Description Penetrations through "A" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Type SCUPPER TO WELD WITH HORIZONTAL AND VERTICAL OUTLET TURBO DRAIN
Applicant CHIBRO Srl Società con socio unico
Via Valtellina, 15,22070 Montano Lucino (CO),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1488
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
July 20, 2023
July 19, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED260923CS/004
Page 1 of 3

Product description

Stainless steel scuppers, having diameter of 130 mm and 150 mm, fitted through decks and connected to stainless steel pipes by means of socket joints fitted with EPDM gaskets or welding.
The scuppers are insulated, when required and on the side exposed to the fire, with mineral wool having density of 100 kg/m3 and/or insulating material type MICROBIFIRE. The mineral wool consists of shaped panels (certified non combustible in conformity to the requirements of the IMO FTP Code) having thickness of 60 mm and/or mineral wool cylinders (certified non combustible in conformity to the requirements of the IMO FTP Code) having thickness of 60 mm. The MICROBIFIRE material, whose density is 300 kg/m3, is to be applied on the scupper (one layer having thickness 30 mm) and on the pipes (two layers, 15 mm thick each).


Field of application
Fire resistant A Class pipe transits through decks having Class as described in the following tables:













 



ATTACHMENT TO
CERTIFICATE Nr. MED260923CS/004
Page 2 of 3


Reference documents

CHIBRO SpA drawings No. 2.39.189.440 (21 sheets) dated 19 February 2010 and No. 2.39.189.447 (3 sheets) approved respectively with endorsement No. LABS-404 on 12 March 2010 and No. LABS-410 on 15 March 2010.


Tests carried out

Tests as per RINA Test Laboratory Report No. 2010CS01735 issued on 12 March 2010 according to IMO Resolution A. 754(18) A.IV.




ATTACHMENT TO
CERTIFICATE No. MED260923CS/004
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****