ELE154325XG!001ENG- -  -  N- M100 series -N- S- S- -26/02/2026- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 1,049,407Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE154325XG/001- N-Feb 24, 20311049407
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE154325XG/001 - (ENG)
Certificate date 26/02/2026
Type Impianti di Automazione
Product Controllore a logica programmabile

Model or Denomin.
Items
M100 series
Applicant Bachmann electronic GmbH
Place of requester Kreuzäckerweg 33  %  6800 Feldkirch  % AUSTRIA
Tel. N.,Fax, Email ---, ---, lothar.lins@bachmann.info
Standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3, Sec. 8, Table 1
Expire date 24/02/2031
Head Office HAMBURG
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE154325XG/001
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Programmable logic controller
Type M100 series
Applicant Bachmann electronic GmbH
Kreuzäckerweg 33
6800 Feldkirch
AUSTRIA
Reference standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3, Sec. 8, Table 1
  

 
 
   .   This Certificate is valid until February 24, 2031
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE154325XG/001
Enclosure - Page 1 of 2
M100 series
Product description:
The M100 series is a modular PLC system for normal environmental conditions.


Type
Desription
M100 modules
AIM112 Analog Input Module
AIO104-I Analog Input/Output Module
AIO112 Analog Input/Output Module
AIO116 Analog Input/Output Module
BPC101 Backplane Slot Cover
BPR1nn Backplane for DIN-Rail Mounting
BPS1nn Backplane for Direct Screw Mounting
COM102 Serial Interface Module
COM104 Serial Interface Module
DIS108 Digital Input Module
DIS112 Digital Input Module
DIS124 Digital Input Module
DIS136 Digital Input Module
DOH108 Digital Output Module (High Power)
DOS108 Digital Output Module
DOS112 Digital Output Module
DOS124 Digital Output Module
DOS136 Digital Output Module
EAS102 Encoder Interface Module
EII102 Counter/Time Measurement/Incremental Encoder Interface Module
NCN102 Node Adapter CAN/CANopen
NEC102 Node Adapter EtherCAT
PSI135 Power Supply Module for Backplane
UIO106 Universal Input/Output Module
UIO108 Universal Input/Output Module


Main characteristics:
Power supply: 24VDC nominal voltage
Ambient temperature: up to -40°C ...70°C (depending of the module type)
Extended climate option for all modules possible, marked by EC
Degree of protection: IP40, terminal block IP30
Firmware version: M-Base V4.xx and V5.xx

Documents:
- Data Sheets
- User Manuals











TYPE APPROVAL CERTIFICATE
No. ELE154325XG/001
Enclosure - Page 2 of 2
M100 series


Test reports:
Bachmann: - Marine013,No,13,15,16,17,18,EMC,Interference,Test,Report,REV000; Marine013,No,19,20,EMC,Emission,Test,Report,REV000; Marine013,No,21,Flammability,Test,Report,REV000; Marine013,No,22,Compass-Safe-Distance,Test,Report,447-25,V1U,REV000; Marine013,No,3,4,Voltage,Variation,Test,Report,REV000; Marine013,No,5,6,11,Temperature,Test,Report,REV000; Marine013,No,9,10,Insulation,High,Voltage,Test,Report,REV000;
TÜV SÜD Product Service GmbH: - TR-713380100-00; TR-713318119-00; TR-713367745-00; TR-713379338-00
Treo: - 447-25

Remarks:
- The equipment fulfils the EC-Code: 3a3.
- The EMC requirements for installation on the Bridge and Deck Zones will be fulfilled by the equipment, if the filter acc. to the M-Base V4.xx Operating manual will be used in power supply line.
- Drawings of each system configuration is to be sent for approval before installation on board.
- In case of major software modification detailed information and suitable documents are to be submitted to the Society.

HAMBURG February 26, 2026
**** NOTICE: This is NOT an official certificate ****