MED094522CS!001ENGD- -  -  N- PORTA A60 LR SX -N- S- S- -28/03/2022- Marine Equipment- - SN- S- - N-  - 220,807B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED094522CS/001- N-Mar 27, 2027220807
 
Form
  Marine Equipment(TO)
Certification N. MED094522CS/001 - (ENG)
Certificate date 28/03/2022
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
PORTA A60 LR SX
Applicant CALISTRI GIACINTO S.R.L. - Calistri Giacinto S.r.L.
Place of requester VIA DEL REDOLONE, 57/A - 44 - 80A - 57  %  51034 Serravalle Pistoiese (PT)  % ITALY
Tel. N.,Fax, Email 0573 527023, 0573 520298, ---
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 10/03/2022
Expire date 27/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED094522CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type PORTA A60 LR SX
Applicant CALISTRI GIACINTO S.R.L. - Calistri Giacinto S.r.L.
VIA DEL REDOLONE, 57/A - 44 - 80A - 57,51034 Serravalle Pistoiese (PT),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 28, 2022
March 27, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED094522CS/001
Page 1 of 2

Product description

Single leaf hinged door whose maximum clear opening size is 950 mm wide and 1840 mm high. The leaf is composed, moving from the side opposite to the hinges, of a steel plate 4 mm thick, and an insulating material compound composed of two layers of non-combustible material type PROMAGUARD 10 mm thick, fitted on the steel plate 4 mm thick, and fixed with aluminium tape on all the edges. The insulating material is reduced to only one layer, 10 mm thick, in the handle housing. Moving from such side, there is cavity and an insulating material compound composed of one layer of non-combustible material type PROMAGUARD 10 mm, thick fitted on the steel plate 3 mm thick, and fixed with aluminium tape on all the edges. The leaf is provided with 4 horizontal steel stiffeners and 4 vertical steel stiffeners, having dimensions of 80x60x4 mm and welded to the steel flat plate 4 mm thick. The leaf frame is composed of a steel profile 6 mm thick fixed to the bulkhead by means of 76 M8 steel bolts. The leaf closure is made tight with a perimeter gasket type EPDM fitted in the bended edge on the rabbet which is shielded with a thermo-expanding tape fitted on the perimeter edge frame. The leaf is equipped with a wedge closing system that acts on 10 steel poles by means of one handle.

Field of application
Fire resistant A-60 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.

Reference documents
Calistri Giacinto & C. s.n.c. drawings No. AA60LR1840X950 dated 17 January 2017 approved on 2 February 2017 with endorsement No. LABS-1409.

Tests carried out
Test as per RINA Test Laboratory report No. 2017CS079/1 issued on 2 February 2017 according to IMO Res. A. 754(18) and to IMO MSC.1/Circ. 1273 dated 30 May 2008.




ATTACHMENT TO
CERTIFICATE No. MED094522CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****