FAB325125XTENG- -  -  N- Q2a and Q3a Stud Link Chain Cables -N- S- S- -30/01/2026- Fabbricanti Approvati- - SN- N- - S-  - 0BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB325125XT- N-Jan 30, 20310
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB325125XT - (ENG)
Certificate date 30/01/2026
Type Approvazione di fabbricanti di materiali
Product Catene per ancora con traversino ed accessori

Model or Denomin.
Items
Q2a and Q3a Stud Link Chain Cables
Applicant ZINTAS KASTAMONU ZINCIR SAN. VE TIC. A.S.
Place of requester BUDAMIS MAH. ANKARA YOLU  5.KM ZINTAS AS. Kastamonu/MERKEZ  %  37130 Kastamonu  % TÜRKIYE
Tel. N.,Fax, Email +90 366 214 99 01, koray@zintas.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 30/01/2031
Responsible Office RINA Turkey Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB325125XT
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Stud link anchor chain cables and accessories
Type Q2a and Q3a Stud Link Chain Cables
Applicant ZINTAS KASTAMONU ZINCIR SAN. VE TIC. A.S.
BUDAMIS MAH. ANKARA YOLU 5.KM ZINTAS AS. Kastamonu/MERKEZ
37130 Kastamonu
TÜRKIYE
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until January 30, 2031
_________________________________
RINA Services S.p.A.
Özgür Yilmaz
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

FAB325125XT
Grey iron castings
Nodular graphite iron castings
Stainless steel castings
C and C-Mn and alloy steel castings in compliance with the RINA Rules or equivalent recognized standards

APPROVAL CONDITIONS


Chemical composition (%):
- Grade Q2a: C < 0,24; Mn < 1,60; Si 0,15-0,55; S and P < 0,035; Al < 0,020;
- Grade Q3a: C < 0,30; Mn < 1,90; Si 0,15-0,35; S and P < 0,040; Al < 0,065;

Chain diameters:
- Grade Q2a: 12,5 mm (min.) - 42 mm (max.);
- Grade Q3a: 12,5 mm (min.) - 42 mm (max.);

Condition of supply:
- Grade Q2a: Normalized;
- Grade Q3a: Quenched and tempered;

Note: Raw material to be supplied by approved manufacturer.

Survey condition: All chain cables and accessories to be used on ships classed with RINA shall meet the requirements of the RINA Rules and shall be tested accordingly.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

 
**** NOTICE: This is NOT an official certificate ****