MED378523CSENGD- -  -  N- FIRE DAMPERS ISOL1 - ISOL2 -N- S- S- -13/12/2023- Marine Equipment- - SN- S- - N-  - 698,745B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED378523CS- N-Dec 12, 2028698745
 
Form
  Marine Equipment(TO)
Certification N. MED378523CS - (ENG)
Certificate date 13/12/2023
Type Protezione antincendio
Product Sbarramenti antincendio
Item Nº MED/3.22
USCG Category N° 164.139

Model
Items/Sizes
FIRE DAMPERS ISOL1 - ISOL2
Applicant ISOL.ME.CAR. S.R.L.
Place of requester VIA DEI BAGNI NUOVA 5  %  34074 Monfalcone (GO)  % ITALY
Tel. N.,Fax, Email 0481 711895, 0481 712772, sonia@isolmecar.it
Directive (EU) 2023/1667
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 31/10/2023
Validity 12/12/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED378523CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.22
USCG Category Nº 164.139
Description Fire dampers
Type FIRE DAMPERS ISOL1 - ISOL2
Applicant ISOL.ME.CAR. S.R.L.
VIA DEI BAGNI NUOVA 5,34074 Monfalcone (GO),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
December 13, 2023
December 12, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED378523CS
Page 1 of 2

Product description

Fire dampers having maximum size of 1000x1000 mm (WxH) (Type ISOL 1) and size greater to 1000x1000 up to 2000x1000 mm (WxH) (Type ISOL 2). The damper frame is composed of stainless steel plate or carbon steel plate, having thickness of 3 mm whereas the blades, having height from 194 up to of 240 mm, are composed of an hollow profile made by two stainless steel sheets or carbon steel sheets, 2 mm thick. The void spaces inside the blades, having thickness of 20 mm, is filled with ceramic fiber (certified non combustible in compliance with IMO FTP Code), having density of 96 kg/m3. The dampers are fitted with an actuator having minimum torque of 12 NM. The dampers Type ISOL 2 are fitted with a vertical mullion composed of an U shaped stainless steel or carbon steel profile, 3 mm thick and having dimensions of 60x60 mm, fitted, on both sides, with an V shaped stainless steel or carbon steel profile, 3 mm thick, filled with ceramic fiber. The A-60 Fire dampers are insulated with one layer of mineral wool (certified non combustible in compliance with IMO FTP Code) having density of 100 kg/m3 and thickness of 60 mm. The mineral wool panels, fixed by means of steel pins and washers, are also applied, on the coaming, for a minimum length of 875 mm.
Field of application
Fire resistant A-0 and A-60 Class fire dampers fitted on bulkheads and on decks.

Reference documents
ISOL.ME.CAR. Srl drawings No. 001/18 and 003/18 dated 27 April 2018, No. 005/18, No. 007/18, 004/18, 006/18, 008/18, 010/18, 011/18, 009/18 dated 28 September 2018, R001/18 and R002/18 dated 3 December 2018 approved on 4 July 2018, 10 July 2018, 23 November 2018, 29 November 2018 and 14 December 2018 respectively with Nos. LABS-1666, LABS-1669, LABS-1769, LABS-1770, LABS-1771, LABS-1772, LABS-1773, LABS-1776, LABS-1775, LABS-1774, LABS-1787 and LABS-1788.
Tests carried out
Tests as per RINA Test Laboratory Reports No. 2018CS011646/1 dated 4 July 2018, No. 2018CS011646/3 dated 10 July 2018, Nos. 2018CS013268/1 - /2 - /3 and /4 dated 23 November 2018, Nos. 2018CS013682/1 -/2 - /3 and /4 dated 29 November 2018 issued according to IMO 2010 FTP Code Part. 3 - Appendix 2 A.II.




ATTACHMENT TO
CERTIFICATE No. MED378523CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****