MED095222CS!001ENGF- -  -  N- MAXPARETE PYRO -N- S- S- -05/04/2022- Marine Equipment- - SN- S- - N-  - 177,694B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED095222CS/001- N-Apr 4, 2027177694
 
Form
  Marine Equipment(TO)
MED011122MI/004,MED011122MI/005,MED011122MI/006,MED011122MI/007
Certification N. MED095222CS/001 - (ENG)
Certificate date 05/04/2022
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
MAXPARETE PYRO
Applicant ODDICINI SRL
Place of requester VIA XX SETTEMBRE,186  %  28883 Gravellona Toce (VB)  % ITALY
Tel. N.,Fax, Email 0323 864144, ---, ---
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 09/03/2022
Expire date 04/04/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED095222CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type MAXPARETE PYRO
Applicant ODDICINI SRL
VIA XX SETTEMBRE,186,28883 Gravellona Toce (VB),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
April 5, 2022
April 4, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED095222CS/001
Page 1 of 2

Product description

Bulkhead, representative of a foldable wall system named MAXPARETE PYRO, composed of “type” panels and one telescopic panel having a upper guide. Panels are 106 mm thick and are fitted with calcium sulphyde slabs (16 mm thick and having density of 1150 kg/m3 or 1500 kg/m3) type Knauf Integral. The bulkhead thickness may be increased up to 190 mm by means of further calcium sulphyde slabs, having maximum thickness of 42 mm, fitted inside the bulkhead.
The maximum dimensions are:
  • “type” panels 2830 mm high and 950 mm wide; telescopic element 2830 mm high and 970 mm wide manufactured with slabs having density of 1150 kg/m3
  • “type” panels 2830 mm high and 1200 mm wide; telescopic element 2830 mm high and 1320 mm wide manufactured with slabs having density of 1500 kg/m3
  • upper guide 190 mm high which extends along the whole wall system width.
Inside the panels a structural frame composed of steel vertical elements (section of 40x25x2 mm) with three aluminium transversal coated stiffeners (upper, medium and lower) is fitted. The frame is fixed to the panels by means of hooks and glue type Protopur AE100 and panel coupling is made of aluminium profiles. Between frame and panels PVC gaskets and felt gaskets are fitted. Perimeter thermo-expanding strips type Advinseal, having dimensions of 15 x 2 mm, have been fitted.
Field of application
Fire resisting B-15 Class bulkhead for general application.
Reference documents
Oddicini Industrie SpA drawings No. 9214-00 Rev.1 dated 04 September 2009 and No. 10811-00 Rev.0 dated 7 march 2012 approved on 9 October 2009 and on 13 April 2012 respectively with endorsement No. LABS-356 and No. LABS-655.
Tests carried out
Tests as per RINA Test Laboratory reports No. 2008CS015138 dated 20 March 2009 and No. 2012CS01983 dated 18 April 2012 issued according to Resolution IMO A.754(18).




ATTACHMENT TO
CERTIFICATE No. MED095222CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****