ENGGN06/06/2025
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED555424WS/002
Certificate date 6/6/25
Type Mezzi di salvataggio
Directive (EU) 2024/1975
Product Launching appliances using falls (davits)
Item Nº MED/1.21
Model 215AH23-4.5D
Identification E2406153
Applicant JIANGYIN SAFETY SEA MARINE EQUIPMENT CO., LTD.
Place of requester NO. 138 XIEJING ROAD, NANZHA TOWN, JIANGYIN CITY  %  214405 Wuxi (Jiangsu)  % CHINA
Tel. N.,Fax, Email 0086 0510 86173220, 0086 0510 86185220,
Standards IMO Res. MSC. 81(70), as amended,IMO Res. MSC. 48(66) - LSA Code, as amended.
Surveyor Chen Yi
Responsible Office RINA China Marine



UNIT VERIFICATION CONFORMITY (MODULE G)
CERTIFICATE No.  MED555424WS/002

This is to certify
that RINA Services S.p.A. did undertake the relevant conformity assessment procedures for the equipment of the manufacturer identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2024/1975.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type 215AH23-4.5D
Identification E2406153
Applicant JIANGYIN SAFETY SEA MARINE EQUIPMENT CO., LTD.
NO. 138 XIEJING ROAD, NANZHA TOWN, JIANGYIN CITY
214405 Wuxi (Jiangsu)
CHINA
Testing standards MSC.81(70) and Res MSC.48(66) LSA Code
    
Issued in RINA China Marine 
on June 6, 2025

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community to affix the following symbol on the equipment above identified.
0474 /25
 

________________________________________
RINA Services S.p.A. - Yongjun Pan
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE No. MED555424WS/002

Verified components of the equipment (with serial number)
E2406153
Technical documentation
RINA drawing No.SHST-53323 approved on 25/09/2024  in compliance with SOLAS 74/96 as amended Reg.III/4, III/12, III/16, III/17,III/23, III/24, III/33,III/34, ; IMO Res.MSC.48(66)-LSA Code, as amended.

- Test report issued by RINA on 15/11/2024(S/N:E2406153) in accordance with resolution MSC.81(70) as amended

Product Description:
- Launching appliance for Rescue boat
- Maximum Working Load: 23kN
- Maximum Hoisting Load: 14kN
- Minimum  Lowering Load: 5kN
- Hoisting speed: >=18m/min
- Steel wire dimension: 18 x 19 -16mm-1870Mpa
- Winch type:N25Z

Limitation on the acceptance or use of the product
Trim up to 10 degrees and list up to 20 degrees; - Arrangement/positioning of launching appliance on board of ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended)
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Yongjun Pan
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****