FAB012423PUENG- -  -  N- Austenitic stainless steel RINA grade 304L,316L or equivalent steel according to recognized standards -N- S- S- -07/02/2023- Fabbricanti Approvati- - NN- N- - S-  - 1,047,124BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB012423PU- N-Jan 31, 20281047124
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB012423PU - (ENG)
Certificate date 07/02/2023
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio saldati

Model or Denomin.
Items
Austenitic stainless steel RINA grade 304L,316L or equivalent steel according to recognized standards
Applicant KOSSEN CO., LTD.
Place of requester 29 BUANNONGGONGDANJI-GIL, HAENGAN-MYEON,  %  579-833 BUAN-GUN, JEOLLABUK-DO  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 63 584 6464, +82 63 581 6648, hongpc@kossen.co.kr
Standards RINA Rules for the approval of manufacturers of materials
Expire date 31/01/2028
Head Office Busan
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB012423PU
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Welded steel pipes
Type Austenitic stainless steel RINA grade 304L
316L or equivalent steel according to recognized standards

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until January 31, 2028
_________________________________
RINA Services S.p.A.
Cheol-Ho You
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB012423PU
Enclosure - Page 1 of 1
Austenitic stainless steel RINA grade 304L,316L or equivalent steel according to recognized standards

APPROVAL CONDITIONS


Size range: - Outside diameter : 21,7 to 812,8 mm
- Wall Thickness : 2 to 12,7 mm

Manufacturing Process: PAW + GTAW welded.

Heat treatment: solution annealing at 1040 C- 1050 C.

Non destructive examination of welded seam: eddy current test or radiographic test.

Remarks: including low temperature service.

Survey conditions: the pipes are to be in compliance in all respects with the requirements specified
in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.







General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

Busan  February 8, 2023
**** NOTICE: This is NOT an official certificate ****