MED220523CSENG- -  -  N- Hi-Macs (R) Solid M Color Range -N- S- S- -07/07/2023- Marine Equipment- - SN- S- - N-  - 1,062,564B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED220523CS- N-Jul 6, 20281062564
 
Form
  Marine Equipment(TO)
Certification N. MED220523CS - (ENG)
Certificate date 07/07/2023
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Item Nº MED/3.18a
USCG Category N° 164.112

Model or Denomin.
Items/Sizes
Hi-Macs (R) Solid M Color Range
Applicant LX HAUSYS LTD
Place of requester 98, Huam-Ro, Jung-gu  %  04637 Seoul  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82269300934, ---, maekpung@lghausys.com
Directive (EU) 2022/1157
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 06/06/2023
Validity date 06/07/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED220523CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.18a
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Type Hi-Macs (R) Solid M Color Range
Applicant LX HAUSYS LTD
98, Huam-Ro, Jung-gu,04637 Seoul,REPUBLIC OF KOREA
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
July 7, 2023
July 6, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED220523CS
Page 1 of 2

Product description



Inorganic modified acrylic solid surface material.
  • Mass per area range (kg/m2) 20.6 ± 0.8
  • Thickness range (mm) 12 ± 0.5

Field of application

As finishing material for all exposed interior and concealed or inaccessible surfaces.
The product may be applied to any metallic support or non-combustible material, if the product would not need any adhesive or combustible material layer.

Where applicable the requirement of Chapter II-2/34 of SOLAS 1974 relevant to the calorific potential for surface unit should not exceed the maximum value of 45 MJ/m2, the product having thickness of 12 mm may be applied on a limited surface; the use of the product on the whole surface is limited to maximum thickness of 4.1 mm.
Tests carried out

-Tests of material HI-MACS FR SOLID S728M - Alpine White as per RINA Test Laboratory reports No. 2017CS01435/13 dated 27 June 2018 and No. 2017CS01435/14 and 2017CS01435/15 dated 4 July 2018 issued according to:
  • IMO 2010 FTP Code Part 2
  • IMO 2010 FTP Code Part 5
  • ISO 1716: 2010

-Tests of material HI-MACS FR SOLID S722M - Black as per RINA Test Laboratory reports No. 2019CS011672/2 and No. 2019CS011672/4 dated 22 May 2019 issued according to:
  • IMO 2010 FTP Code Part 5
  • ISO 1716: 2010




ATTACHMENT TO
CERTIFICATE No. MED220523CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****