MED682525WSENGF- -  -  N- SAR25-1 -N- S- S- -05/12/2025- Marine Equipment- - SN- S- - N-  - 120,455B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED682525WS- N-Dec 4, 2030120455
 
Form
  Marine Equipment(TO)
MED902725WS/008,MED902725WS/009,MED902725WS/010,MED902725WS/011
Certification N. MED682525WS - (ENG)
Certificate date 05/12/2025
Type Mezzi di salvataggio
Product Liferaft launching appliances (davits)
Item Nº MED/1.24

Model or Denomin.
Items
SAR25-1
Applicant ZHEJIANG WANTONG HEAVY INDUSTRY CO., LTD.
Place of requester No.680, Haichang Road, Binhai Industry Area, Taizhou Economic Development Zone, Zhejiang Province, China
Tel. N.,Fax, Email 0576-89207515, 0576-89207522, wtqc@wantongship.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended.
Reference Documents SOLAS 74 Reg.III/4,SOLAS 74 Reg.X/3,SOLAS 74 Reg.III/12,SOLAS 74 Reg.III/16,SOLAS 74 Reg.III/34,IMO Res. MSC.36(63)-(1994 HSC Code) 8,IMO Res.MSC.48(66)-(LSA Code) I,IMO Res.MSC.48(66)-(LSA Code) VI,IMO Res.MSC.97(73)-(2000 HSC Code) 8,IMO MSC.1/Circ.1632.
Expire date 04/12/2030
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED682525WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.24
Description Liferaft launching appliances (davits)
Type SAR25-1
Applicant ZHEJIANG WANTONG HEAVY INDUSTRY CO., LTD.
No.680, Haichang Road, Binhai Industry Area, Taizhou Economic Development Zone, Zhejiang Province, China
Testing standards IMO Res. MSC.81(70), as amended.
Reference standards SOLAS 74 Reg.III/4,SOLAS 74 Reg.X/3,SOLAS 74 Reg.III/12,SOLAS 74 Reg.III/16,SOLAS 74 Reg.III/34,IMO Res. MSC.36(63)-(1994 HSC Code) 8,IMO Res.MSC.48(66)-(LSA Code) I,IMO Res.MSC.48(66)-(LSA Code) VI,IMO Res.MSC.97(73)-(2000 HSC Code) 8,IMO MSC.1/Circ.1632.
Issued in SHANGHAI on
This Certificate is valid until
December 5, 2025
December 4, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED682525WS
Page 1 of 2

TECHNICAL DATA


Product Description:
- Maximum Working Load: 25 kN
- Maximum Hoisting Load: 4 kN
- Arrangement/positioning of launching appliance on board of the ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).

REFERENCE DOCUMENTS

Technical Documents and Reports approved and filed by RINA listed on Approval drawings and letters No.: SHST-59922 SAR25-1 Single Arm Liferaft Launching Appliance(SHST/2025/1855/LEIGU) / SHST-61168 SAR25-1 Davit Test Report(SHST/2025/2188/LEIGU) / SHST-59918 Application Form / SHST-60048 Risk Assessment

TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, the launching appliance was tested under witnessing of RINA as per Prototype Test Report dated on 05/12/2025.


NOTE

Materials as stated on the approved drawing are to be delivered with maker's product certificates.

Installation, on board testing, support to the deck structure shall be accepted by attending surveyor.





ATTACHMENT TO
CERTIFICATE No. MED682525WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****