DIP234426XT!003BILB- -  -  N- Watertight Flush Steel Door -N- S- S- -29/07/2026- Prodotti per nautica diporto- - NN- N- - N-  - 166,397BbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP234426XT/003- N-Jul 29, 2029166397
 
Form
  Prodotti per nautica diporto(TO)
DIP234426XT/003
Certification N. DIP234426XT/003 - (BIL)
Certificate date 29/07/2026
Product Porta stagna

Model or Denomin.
Items
Watertight Flush Steel Door
Applicant BOFOR DENIZCILIK SANAYI VE TICARET LTD.STI.
Place of requester AYDINLI BIRLIK OSB MAH., BATI CAD., No.28  %  34953 Tuzla  % TÜRKIYE
Tel. N.,Fax, Email +90 216 466 4619, +90 216 466 4621, volkanbalci@bofor.com.tr
Directive NONE
Standards RINA rules for the Classification of Yachts
Expire date 29/07/2029
Head Office ISTANBUL
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP234426XT/003
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Porta stagna
Description Watertight door
Tipo Watertight Flush Steel Door
Type
Norme di riferimento RINA rules for the Classification of Yachts
Reference standards RINA rules for the Classification of Yachts








_________________________________
RINA Services S.p.A.
  
Alper Tek
       
Rilasciato a ISTANBUL il 29  Luglio  2026.  Questo Certificato è valido fino al 29 Luglio 2029
   
Issued in ISTANBUL  on July 29, 2026. This Certificate is valid until July 29, 2029
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
DIP234426XT/003
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
STEEL DOOR
Reference documents:
Job nr. 2026/XT/01/2344

Product Description:
- Watertight doors: 590 x 590 mm; 590 mm x 1460 mm; 1072 mm x 2072 mm.

- See drawings approved on 30 March 2009 with nr. DIP-43017 and 15 September 2015 with nr. ISDP-17246 and 15 October 2019 with nr. ISDP-23907.

- If the same construction materials, as per approved a.m. drawing, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 590 and 1072 mm and long side between 590 and 2072 mm.

- Doors suitable for an hydraulic pressure of 5.0 m head.

- Doors fitted on escape ways are to be operable by both sides (handles are to be permanently fixed).

- When located in houseside, the doors are to be hinged at the forward edge.

- After installation on board, a water jet test is to be carried out.

- The T.A. is relevant only to "watertightness".

- Door suitable for yachts designed for Commercial use having GT less than 500 and fitted other than category A machinery spaces and galley boundaries.

- Door suitable for pleasure yachts having any GT and fitted other than category A machinery spaces and galley boundaries.

- Door suitable for pleasure yachts having GT equal to or less than 300.

- Watertight doors for "RINA Rules for the Classification of Yachts"


Fields of application:
- Watertight door


 29/07/2026 
 Istanbul  January 7th, 2019
**** NOTICE: This is NOT an official certificate ****