MED382225CS!001ENGD- -  -  N- LW -N- S- S- -26/08/2025- Marine Equipment- - SN- S- - N-  - 27,010B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED382225CS/001- N-Aug 25, 203027010
 
Form
  Marine Equipment(TO)
Certification N. MED382225CS/001 - (ENG)
Certificate date 26/08/2025
Type Protezione antincendio
Product Dual-purpose type nozzles (spray/jet type): (b) Hand-held branch pipes for fire service use - Smooth bore jet and/or one fixed spray jet angle branch pipes PN 16
Item Nº MED/3.55b

Model or Denomin.
Items
LW
Applicant VAMPA S.R.L..
Place of requester VIA AL MOLO GIANO SNC  %  16128 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010 2468921, 010 2468806, luca.barbieri@vampa.it
Directive (EU) 2024/1975
Standards EN 15182-1:2019, EN 15182-3:2019.
Reference Documents SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Request 04/08/2025
Expire date 25/08/2030
Head Office RINA Genoa Marine
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED382225CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.55b
Description Dual-purpose type nozzles (spray/jet type): (b) Hand-held branch pipes for fire service use - Smooth bore jet and/or one fixed spray jet angle branch pipes PN 16
Type LW
Applicant VAMPA SRL
VIA AL MOLO GIANO,16128 Genova (GE),ITALY
Testing standards EN 15182-1:2019, EN 15182-3:2019.
Reference standards SOLAS 74 Reg. II-2/10, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7.
Issued in RINA Genoa Marine on
This Certificate is valid until
August 26, 2025
August 25, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED382225CS/001
Page 1 of 2
Product description

Dual-purpose nozzle (spray/jet) model hand-held branch pipes for fire service use smooth bore jet and /or one fixed jet angle.
MODEL
LW12
LW 16
LW 19
Working pressure
16 bar
16 bar
16 bar
Nozzle diameter
12 mm
16 mm
19 mm
Full jet (6 bar)
203 l/m
350 l/m
400 l/m
Spray jet (6 bar)
190 l/m
301 l/m
451 l/m
Effective throw (6 bar)
25.1m
33m
34m
Spray angle (6 bar)
31±1°
31±1°
34±1°
Mass (Kg)
1
1.2
1.2
Main dimensions
(395x208x142) mm
(420x205x138) mm
(420x205x139) mm
Field of application

Fire nozzle to be used in conjunction with hoses for fire fighting purposes on board ships.

Reference documents

Technical drawings n° 10-02-001, 10-02-002 and 10-02-005 - Mod.LW-12/16/19 edit by Vampa and approved by RINA with n° CSST/25025.
Tests carried out

Test reports n° 0026\DC\EST\25_1, 0026\DC\EST\25_3 and 0026\DC\EST\25_5 dated 25/08/2025, issued by CSI in compliance with EN15182-1(2019) & EN 15182-3 (2019) and filed by RINA with n° CSST/25026.

Remark
Branch pipes shall be permanently marked according to EN 15182-1 (2019) Par 8.2.




ATTACHMENT TO
CERTIFICATE No. MED382225CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****