MED019624CS!002ENGBNJan 25, 2027
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo di qualità
Module: B
Certification N. MED019624CS/002
Certificate date 1/25/24
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Item Nº MED/3.18a
USCG Category N° 164.112
Model or Denomin. Unisce Marine High Pressure Laminates 3 mm
Applicant Jiangsu Jiashijia New Material Group Co., Ltd.
Place of requester No.26 Nanmeng Road, Weixin, Economic Zone Changzhou (Jiangsu)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2023/1667
Dati Certificato D o E
Certification N. MED318423WS/002
Certificate date 05/03/2024
   

Hong Gu S


PRODUCTION QUALITY ASSURANCE (MODULE D)
CERTIFICATE No.  MED318423WS/002

This is to certify
that RINA Services S.p.A. did undertake the relevant quality assessment procedures for the equipment of the manufacturer identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2023/1667 and according to the type described in the EC Type Examination Certificate (Module B) below indicated.
MED Item Nº MED/3.18a
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Type Unisce Marine High Pressure Laminates 3 mm
Applicant Jiangsu Jiashijia New Material Group Co., Ltd.
No.26 Nanmeng Road, Weixin, Economic Zone Changzhou (Jiangsu),CHINA
Module B certificate Number  MED019624CS/002
Date  Jan 25, 2024 
Date   RINA (No. 0474)
    
Issued in RINA China Marine on
This Certificate is valid until
March 5, 2024
January 25, 2027

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community in conjunction with the EC TYPE EXAMINATION (MODULE B) CERTIFICATE to affix the following symbol on the equipment above identified.
0474 /YY
YY Last two digits of year mark affixed
USCG Approval marking
The manufacturer is allowed to affix the U.S. Coast Guard approval number (USCG approval number:
164.112/EC0474/MED318423WS/002 to the above equipment, as allowed by the 'Agreement between the European Community and the United States of America on Mutual Recognition of Certificates of Conformity for Marine Equipment' signed February 27th, 2004.

________________________________________
Hong Gu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No. MED318423WS/002
Equipment:
Unisce Marine High Pressure Laminates 3 mm
Technical documentation

____________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) RINA personnel are to be allowed to witness during the performances of activities, upon their request
d) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules
e) RINA may revoke the approval in the case of modifications to requirements or conditions for the approval
f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply.
g) This certificate loses its validity in case the EC type Examination (Module B) certificate is no more valid.
__________________________________
Hong Gu

**** NOTICE: This is NOT an official certificate ****