ELE388625XGENG- -  -  N- PRO TOP1, PRO TOP2, PRO TOP3, PRO TOPDC -N- S- S- -02/03/2026- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 744,031Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE388625XG- N-Mar 1, 2031744031
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE388625XG - (ENG)
Certificate date 02/03/2026
Type Impianti Elettrici
Product Alimentatori modulari.

Model or Denomin.
Items
PRO TOP1, PRO TOP2, PRO TOP3, PRO TOPDC
Applicant WEIDMUELLER INTERFACE GMBH & CO. KG
Place of requester KLINGENBERGSTRASSE 26  %  32758 Detmold  % GERMANY
Tel. N.,Fax, Email 0049 5231 14 0, 0049 5231 14 292083, info@weidmueller.com
Standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3, Sec. 8, Table 1
Expire date 01/03/2031
Head Office HAMBURG
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE388625XG
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description COMPACT POWER SUPPLY UNITS.
Type PRO TOP1, PRO TOP2, PRO TOP3, PRO TOPDC
Applicant WEIDMUELLER INTERFACE GMBH & CO. KG
KLINGENBERGSTRASSE 26
32758 Detmold
GERMANY
Reference standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3, Sec. 8, Table 1
  

 
 
   .   This Certificate is valid until March 1, 2031
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE388625XG
Enclosure - Page 1 of 4
PRO TOP1, PRO TOP2, PRO TOP3, PRO TOPDC
Product description:
The PRO TOP1, PRO TOP2, PRO TOP3 and PRO TOPDC series are AC/DC, DC/DC power supplies.


Components:
Output Power
Output Voltage
Output Current
Design
PRO TOP1:
72 W
24 V
3 A
Standard, F, CO
120 W
12 V
10 A
Standard, F, EX
120 W
24 V
5 A
Standard, F, EX
240 W
24 V
10 A
Standard, F, EX
480 W
24 V
20 A
Standard, EX
480 W
48 V
10 A
Standard, EX
960 W
48 V
20 A
Standard
960 W
24 V
40 A
Standard
960 W
48 V
20 A
CO
960 W
24 V
40 A
Ex




PRO TOP2:
120 W
24 V
5 A
Standard, EX
240 W
24 V
10 A
Standard, EX
240 W
48 V
5 A
Standard




Standard = output terminal assignment 2(+) / 3(-)
F = Flange, output terminal assignment 2(+) / 2(-), connector flange
CO = coated
EX = ex-protected











TYPE APPROVAL CERTIFICATE
No. ELE388625XG
Enclosure - Page 2 of 4
PRO TOP1, PRO TOP2, PRO TOP3, PRO TOPDC

Components (continued):
Output Power
Output Voltage
Output Current
Design
PRO TOP3:
120 W
24 V
5 A
Standard, CO
240 W
24 V
10 A
Standard, CO
480 W
24 V
20 A
Standard, CO
480 W
48 V
10 A
Standard, CO
960 W
36 V
26.6 A
CO
960 W
24 V
40 A
Standard, CO
960 W
48 V
20 A
Standard, CO




Standard = output terminal assignment 2(+) / 3(-)
CO = coated
Output Power
Output Voltage
Output Current
Design
PRO TOPDC:
120 W
24 V
5 A
Standard, EX
240 W
24 V
10 A
Standard, EX, U+
480 W
24 V
20 A
Standard, EX, U+
480 W
48 V
10 A
Standard
Standard = output terminal assignment 2(+) / 3(-)
EX = ex-protected
U+ = increased max. adjustable output voltage

Rating (Input Voltage):
PRO TOP1 100 ... 240 V AC (L+N+PE), 50/60 Hz
120 ... 340 V DC
The DC supply voltage shall not exceed 410 V DC
PRO TOP2 100 ... 240 V AC (L+N+PE), 50/60 Hz
400 ... 500 V AC (L1+L2+PE), 50/60 Hz
320 ... 500 V DC
PRO TOP3 400 ... 500 V AC (L1+L2+L3+PE), 50/60 Hz
450 ... 500 V DC
A minimum DC supply voltage of 440 V DC is required
PRO TOPDC 24 V DC
Ambient temperature:
Standard device: -25° C ... +70° C (derating: > +60° C)
EX or CO device: -40° C ... +70° C (derating: > +60° C
Degree of protection: IP20
Mounting: DIN mounting rail, wall adapter, direct mounting (refer to technical specification)

Status relay: 30 V AC/DC max. 1 A


I/O connection: 0 V/ 24 V

TYPE APPROVAL CERTIFICATE
No. ELE388625XG
Enclosure - Page 3 of 4
PRO TOP1, PRO TOP2, PRO TOP3, PRO TOPDC

Protection against internal short circuits due to integrated ORing-MOSFET technology.
Direct parallel operation for redundancy or for power increase (up to 10 PRO TOP units).
All power supplies (PRO TOP1, PRO TOP2, PRO TOP3, PRO TOPDC) are able to operate parallel on output connection with any power supplies of the PRO TOP1, PRO TOP2, PRO TOP3, PRO TOPDC series.
DIP switches for selection of operating modes (for details see manual).

Accessories:
PRO COM CAN OPEN (EX): CANopen field bus communication interface; HVN 01.00.x/ SVN 01.00.x (marine approved for data monitoring only),
PRO COM IO-LINK: IO-LINK field bus communication interface; HVN 02.00.x/ SVN 02.05.x (marine approved for data monitoring only; PRO TOP2 only)
PRO TOP Brackets
Walladapter

Restriction:
Minimum required HVN of PRO TOPDC models in use with PRO COM CAN OPEN (EX) accessories:
120W, 24V, 5A Standard: 01.05.00
120W, 24 V, 5A EX: 01.06.00
240W, 24V, 10A: 01.07.00
480W, 24/48V, 20/10A: 01.04.00

Software of PRO TOP modules:
PRO TOP1: 02.00.x
PRO TOP2: 01.00.x
PRO TOP3: 02.00.x
PRO TOPDC: 01.00.x

Documents:
- Technical specifications: PRO TOP...


Test Reports:
SiTiiAS no. A19-001-WT, dated 2019-07-16, A19-001-WT-01, dated 2019-09-02, A19-008-WT, dated 2019-11-08;
DTECH no. TR1910150502, dated 2019-12-12, TR1911040602, dated 2019-12-12, TR1908020101, dated 2019-09-18;
BSH Certificate no. 1039, dated 2019-12-03, 1042, dated 2020-01-23;
Weidmueller Central Laboratory no. LAB22265E, dated 2019-03-28, LAB22327E, dated 2019-05-17, LAB22345E, dated 2019-05-31, LAB22660E, dated2019-12-13, LAB22909E, dated 2020-04-06, LAB22914E, dated 2020-07-09, LAB22910E dated 2020-07-23, LAB22931E, dated 2020-07-23; LAB23828E, dated 2022-05-18; LAB23931, dated 2022-07-12; LAB24417E, dated 2023-05-23; LAB24447E, dated 2023-01-20; LAB24513E, dated 2023-07-14; LAB24339E, dated 2023-04-18; LAB24385E, dated 2023-05-25; LAB24461E, dated 2023-06-16;
EMC Test NRW: P20-Z-00055-001, dated 2020-07-08, P20-Z-00055-002, dated 2020-07-08













TYPE APPROVAL CERTIFICATE
No. ELE388625XG
Enclosure - Page 4 of 4
PRO TOP1, PRO TOP2, PRO TOP3, PRO TOPDC


Remarks:
- The products fulfill EC-Code: EC 3a3/43 (PRO TOP1, PRO TOP3, PRO TOPDC), EC 3a1/41 (PRO TOP2).
- The EMC requirements for installation on the Bridge and Deck Zones will be fulfilled by the equipment (PRO TOP1, PRO TOPDC).

Additional place of manufacture:

Shenzhen Weipo Digital Energy Co.,Ltd
No.192, Xinfeng Road, Ebu Village, Ebu Town
Shenshan, Special Cooperation Zone
Shenzhen, Guangdong 518000
China

HAMBURG March 2, 2026
**** NOTICE: This is NOT an official certificate ****