MED511525CS!021ENG- -  -  N- B0 WALL FOR METAL BATHROOM WITH RESTORING BOXES -N- S- S- -11/02/2026- Marine Equipment- - SN- S- - N-  - 2,370,495B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED511525CS/021- N-Dec 2, 20302370495
 
Form
  Marine Equipment(TO)
Certification N. MED511525CS/021 - (ENG)
Certificate date 11/02/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
B0 WALL FOR METAL BATHROOM WITH RESTORING BOXES
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO Circ. MSC 1120,IMO Circ. MSC.1 1581
Expire date 02/12/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED511525CS/021

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type B0 WALL FOR METAL BATHROOM WITH RESTORING BOXES
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9; IMO Circ. MSC 1120; IMO Circ. MSC.1 1581
Issued in Genoa on
This Certificate is valid until
February 11, 2026
December 2, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED511525CS/021
Page 1 of 2

Product description


B-0 Class bulkhead having maximum total height 2410 mm, certified by RINA with EC Type Examination Certificate No. MED511525CS/022 fitted on the lower side, with a C shaped profile, 2 mm thick and having height of 210 mm. The bulkhead may be fitted with the following accessories:

· Box composed of a steel sheet, 1 mm thick, having dimensions of 160x120 (WxH) mm and depth of 100 mm. The hole of the box has dimensions of 110x75 mm. The box, is fixed to the panel steel sheet by means of 4 rivets.


· Box composed of a steel sheet, 1.5 mm thick, having dimensions of 300x304 (WxH) mm and depth of 100 mm. The hole of the box has diameter of 150 mm. The box is fixed to a steel sheet, 1 mm thick and having dimensions of 1015x366 mm, by means of 8 self-screwing screws 4.8x16 mm type. This steel sheet is screwed to the bulkhead joints by means of 6 self-screwing screws 4.8x16 mm type.

· Box composed of a steel sheet, 1.5 mm thick, having dimensions of 343x636 (WxH) mm and depth of 123 mm. The hole of the box has dimensions of 280x575 mm. The box, at the lower edge of the bulkhead, is fixed to a steel sheet, 1 mm thick and having dimensions of 1015x752 mm, by means of 12 self-screwing screws 4.8x16 mm type. This steel sheet is screwed to the bulkhead joints by means of self-screwing screws 4.8x16 mm type with pitch of 350 mm.
Field of application

Fire resistant B-0 Class bulkhead with accessories for general application.

Reference documents

MARINE INTERIORS CABINS SPA drawings No. 24PC00408 Rev. 00 and No. 24PC00407 Rev. 00 dated 29 July 2021 approved on 3 November 2021 respectively with endorsement Nos. LABS-2292 and LABS-2293.

MARINE INTERIORS CABINS SPA drawings No. +24PC00408 Rev. 01 and No. 24PC00407 Rev. 01 dated 22 May 2024.


Tests carried out

Tests as per RINA Test Laboratory reports Nos. 2021CS013167/1 and 2021CS013167/2 issued on 3 November 2021 and No. 2024CS01208/3 and 2024CS01208/4 issued on 23 February 2024, according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED511525CS/021
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****