ELE502722CSENGD- -  -  N- DPD02DM44 and DPD02DM44B -N- S- S- -22/03/2023- Prodotti Elettrici- - SN- N- Luigi Benedetti- N-  - 369,074Luigi BenedettiBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE502722CS- N-Mar 20, 2028369074
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE502722CS - (ENG)
Certificate date 22/03/2023
Type Impianti di Automazione
Product Relè trifase di monitoraggio multifunzione

Model or Denomin.
Items
DPD02DM44 and DPD02DM44B
Applicant CARLO GAVAZZI CONTROLS SPA
Place of requester VIA SAFFORZE N 8  %  32100 Belluno (BL)  % ITALY
Tel. N.,Fax, Email 0437 355811 giampaolo.tormen@gavazziacbu.it
Standards Rules for the Classification of Ships - Part C - Machinery, Systems and fire protection - Ch.3, Sect.6, Tab.1.
Expire date 20/03/2028
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE502722CS
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description 3-Phase Multifunction Monitoring Relay
Type DPD02DM44 and DPD02DM44B
Applicant CARLO GAVAZZI CONTROLS SPA
VIA SAFFORZE N 8
32100 Belluno (BL)
ITALY
Reference standards Rules for the Classification of Ships - Part C - Machinery, Systems and fire protection - Ch.3, Sect.6, Tab.1.
  

 
 
   .   This Certificate is valid until March 20, 2028
_________________________________
RINA Services S.p.A.
Luigi Benedetti
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE502722CS
Enclosure - Page 1 of 2
DPD02DM44 and DPD02DM44B
Series DPD02 DM44 is a 3 - Phase Multifanction configurable Relay suitable for both Delta and Star mains.
It protect loads from wrong phase sequence, neutral and phase loss, additionally voltage, frequency and asymmetry thresholds can be set and provide outputs signals.

Main functions:
  • 3Ph or 3Ph + N monitoring
  • From 177V to 552V LL or 102V to 318V LN
  • Operating frequency from 45 Hz to 440 Hz
  • Phase sequence and Phase or Neutral loss alarms
  • Up to 10 alarms combinable with AND/OR operators
  • NFC communication Interface

Alarms:

There are 2 types of alarm for the DPD: the "Priority" alarms and the "Non Priority" alarms.

Priority alarms de - energize both outputs at the same time when they are triggered:
  • Phase loss
  • Neutral loss (only in "Star" configured systems)
  • Priority alarms cannot be disabled
  • Wrong phase sequence
  • Out of range measurement


Priority alarms cannot be disabled. The threshold can be set for the phase or neutral loss.

Non Priority alarms are totally configurable by user. Type of measurement to be monitored and trigger valure can be freely sey, within the specified ranges and changed any time:
  • Undervoltage U <
  • Overvoltage U >
  • Overfrequecy f >
  • Underfrequency f <
  • Threephase asymmetry


Up to 10 virtual alarms among the above types can be configured.

Visual Information:

The DPD is equipped with 3 LEDs which provide the status information:
  • LED 1 is lit when the Output 1 is energized
  • LED 2 is lit when the Output 2 is energized
  • LED 3 is bicolor and can be blinking or fixed





  • TYPE APPROVAL CERTIFICATE
    No. ELE502722CS
    Enclosure - Page 2 of 2
    DPD02DM44 and DPD02DM44B
LED 3 keys:
LED 3
Status
Green on fixed Ok
Green flashing Alarm triggered but configured delay is elapsing
1 red flash Phase or neutral loss or phase sequence
2 red flashes Under / Overvoltage
3 red flashes Under / Overfrequency
4 red flashes Asymmetry
5 flashes Out of range parameter

Reference documents:
RINA Certificate ELE347717CS
Dekra test report n. R23050701
Offerta 2022/26866 dated 21/12/2022

Note:
Standard ordering key may be added with additional code with respect to aesthetic modifications.

Genoa March 22, 2022
**** NOTICE: This is NOT an official certificate ****