Single leaf hinged door, installed in an aluminium bulkhead, whose maximum clear opening dimensions are 1073 mm (W) and 2088 mm (H). The leaf, having maximum width of 1100 mm and maximum height of 2100 mm, is made of one single panel of a composite material. The panel is composed of three skins of material type NEPTUNE SHEET or type CARETTA SHEET, 2 mm thick each and having density of 1250 kg/m3 and, in between, two layers of mineral wool type ROCKWOOL SEAROX SL450, 22 mm thick and having density of 160 kg/m3. Vertical stiffeners made of NEPTUNE SHEET or CARETTA SHEET are fitted, between the two skins, every 100 mm. The composite panel edge is contained within two U profiles: the outer steel profile has dimensions of 30x52x1 mm and the inner stainless steel profile has dimensions of 40x46x1.5 mm. The door is fitted with a locking system with lock type BMH DIN18250 and three steel hinges made by Caretta or type Tectus 640 3D A8. The door frame is composed of steel profiles having thickness of 3 mm, fixed to the bulkhead by means of screws M8x25 mm with pitch of 150 mm. The door frame is fitted with NEPTUNE SHEET or CARETTA SHEET flat bars having dimensions of 40x2.5 mm and 50x4 mm. The door may be equipped with a self-closing hose port and a concealed door closer type Dorma ITS 96 4-6.
Field of application Fire resistant A-60 Class single leaf hinged door with the fire hazard on both sides in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested;
- door used with a fire tested frame design.
The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents PANMERC ENTERPRISES LTD drawing No. HSF-A60-150 Rev. B dated 21 April 2016 approved on 12 April 2017 with endorsement No. LABS-1452.
PANMERC ENTERPRISES LTD drawing No. HSFL-A60-160 Rev. B dated 1 February 2017 approved on 18 April 2017 with endorsement No. LABS-1453.
Tests carried out Tests as per RINA Test Laboratory reports No. 2016CS01980/3 issued on 12 April 2017 and No. 2016CS01980/4 issued on 18 April 2017 according to IMO 2010 FTP Code Part 3. |